Search results

yes they do ..

Where do you live ? Michigan, Texas and a few other states have to pay 100% in full before the car can be brought in state even.

I find this hard to believe since it is only cars built after 8/5, what is your build date ? and i assume fremont ?

weird .. i've called about 15 shops in 3 states .. the cheapest i've found is 6400 for an xpel custom wrap (not using templates).

bcv

sent you a pm

What are you talking about? You want cruise control you’ve got it pull down oncelroblem solved. What are you complaining about ?

Anyone installed one ? The AP dash am quality is horrible just looking for tips to hardwire a thinkware cam

Yes and if you didn’t your seals would grow mold. How the service manager doesn’t know this is beyond me.

It’s a 10/10 in terms of difficulty good luck to uou

Visually it is tinted yes, but it has 0 cermaic/heat rejection capability. The 3 needs ceramic tint all around including windshield to be tolerable driving in the sunny states.

Never mind. Stupid design issue the clasp in the hpwc the wires go into is poorly designed it’s easier to have cables slip behind the clasp then in it.

Fairly simple setup. 60amp breaker, THHN #6 Red -> L1 on the HPWC 60 amp breaker, THHN #6 Black -> L2 on the HPWC <house groujnd> , copper bare -> copper ground on HPWC Flip on the breaker, no LED (yes the ribbon is connected) no red, no yellow, no green, nothing. Volt meter shows 120 between...

Lets be real however, given the actual amp draw never exceeds 48A, you will never cross the 60c temp rating of the NM-B 6/3. NM-B 6/3 is rated for up to 55amps, and that is continuous load not @ 80%. Everything with electrical code is over engineered, yes for good reason, but in an...

So something I was unaware of before, but my local tint shop is cautioning me that tinting everything including the front windshield could be problematic in the early morning due to LAH, an issue that he says effects all ceramic films. Thoughts?

My autospa which is doing all my wrapping/ceramic/tinting work is recommending Flexfilm® | Window Film Distributor , which is their preferred ceramic tint. Has anyone heard of this product? I can't find it searching here which has me nervous about using it?

You have apparently no background in electrical science. Why is every datacenter in the us run at 208 (or higher). Power is LOST, evaporates poof (ok its heat I’m being dramatic on purpose) during transmission the lower the voltage the higher the percentage of this loss. 208/10a is better...

They ar They are NOT the same efficiency, 208/240 is ~10% more efficient as I. Less power lost in transmit (heat) then 110/120

What on earth are you talking about? Electrical 101, 240v is ~10% more efficient then 120. This has nothing to do with the battery cooling or “overhead” it is less power lost in transmit (ie heat). You should not use 110 to charge a tesla, it is wasteful and there is no reason for it.

has anyone used ceramic coating on white interior? The oproduxt page cautions against use on white interiors but I really want to protect my white interior from jean transfer. Anyone?

Why is this? Wax won't hurt PPF or ceramic at all? It may not bond as well but its not going to hurt it?

You’ve been very lucky but I would caution people reading your post Toni derstand that ceramic does absolutely nothing to prevent chips. There is a reason PPF exists there is simply no coating that adds similar protection.

Let me see if i'm reading your logic. You are willing to wait until Sept, and risk loosing out on $3,750 tax credit, in order to save $350 or at most $700 on two months of cross loan?

White in white with chrome delete. Tons of contrast definitely what I am getting.

When I log in to my Tesla account it shows : Next Steps We are drafting up your contract and will contact you when you can make your final payment. Who must be present at delivery? All persons listed on the registration must be present to sign at delivery. If you are trading in a vehicle...

I'm aware, but still 100A household service does have limits, and many electricians will not install that much excess power regardless of the live load. And it is usually relatively inexpensive to upgrade the home service, going from 100A to 200A for me cost $900

No he would dial the dip switches on the charger to limit it to 36A rate, and this is a smart move on his part given the OP electrical setup.

The bottom line is your home's 'service' is only 220/100A. This is much too small for the loads you have, while you have him working on your house have him upgrade your homes service to 200A. You are going to need to do so anyway very very soon. You already have 300A worth of breakers, I'm...

Both TSportline and RPM are in California, I am in Michigan and having a white M3 with 19" wheels. Need to do a full chrome delete, and blackout of the wheels. Anyone know where I can find someone to do this? Michigan, Ohio, Indiana, Illinois?

You do NOT want Tesla to deliver your M3. They consider the vehicle 'delivered' when it is loaded on the transport, you will have to take it to the service center and can not refuse delivery if there are any issues.

I've read things that lead me to believe the Model 3 comes with a 220 charging cable? I already have a 220 50 amp outlet in my garage from when I owned a Volt. I'm trying to figure out if I need to shell out the $500 for the Tesla wall charger or not. Can someone clarify please ?