Search results

Oh, the service center replaced it for me pretty much no questions asked

The templates I shared are Kenriko's, I just converted them to silhouette files through illustrator. I exported from illustrator to dxf, and then loaded the dxf into silhouette software (and then sized the same as illustrator). Multiple people locally have used them successfully. Watch...

The service center was able to reproduce it and fix it mostly thanks to this video . Turned out to be a lower control arm bushing. The issue seems to be resolved now 2 days after picking it up. Their wrottew notes say they lubricated the bushing and tightened everything in the suspension to...

I keep mine on Low all the time but not due to road conditions. I didn't enjoy going back and forth between the 3 and the Outback and having such a different driving dynamic. If I didn't have to regularly drive an ICE vehicle I would otherwise keep it on all the time.

Yeah I'd really at least like an option to set to current speed. Every other car I've ever driven before has that as the default behavior and it seems more sane to me. Especially considering multiple roads in my area have the wrong speed limits set. My bigger concern is the really hidden way...

I'm going to the SC tomorrow. This will be the second time asking them to address this issue. The first time they 'tightened everything in the suspension' and were unable to reproduce the sound the next morning, but by the time I got home the noise was back. After a couple of weeks I've been...

I have the same problem. It comes and goes so it's very hard to reproduce and veryvery anno. There are a few threads about this around the different forums but nobody has posted and concrete solutions. I need to go in for a service appointment soon and I'll bring it up then. Good luck and let...

I have the Silhouette files here: Cut Templates - Google Drive

My problem with the 'driver must be aware' is that you never really know when to intervene for sure. If the op stopped it at 20cm who knows if the car was going to stop at 10cm? It's impossible for the driver to know what the car is planning to do so then you are stuck in this guessing game of...

What settings did you use? I cut mine and they installed perfect but I just chose the matte vinyl preset

This thread is so conflicting. Trying to balance how annoying the color mismatch is with the risk of having someone touch the car! It's really too bad it's come to this

Ahh yes, I wanted to see if I was missing something before I start modifying.

But the taper is intentional?

Kenriko I noticed that the cup holders cutout in the illustrator file is slightly tapered. It's not 7.75" white across the whole thing. I had a difficult time getting flush alignment near the portion that wasn't as wide (by the arm rest) Was this intentional? the upper portion was much easier...

Does anyone have templates for the door handles?

This happened to me for the first time yesterday during the app outage. I was able to get into the car but no screen was on or any AC etc.

Has anyone cut these with a Silhouette Cameo yet? Any feedback yet? I was thinking about trying this weekend but I don't want to waste my time if I shouldn't :)

Yeah I was just looking for some tips on a diy solution?

So, I'm pretty disappointed to notice that there was a scratch across my glovebox after I got back from the service center today. I've sent an email with photos to document since they are closed and hopefully they aren't going to say it was there already. I guess you have to look over the whole...

I dropped my car off at the local service center for another issue, and pointed out the paint. The first person I talked to thought this was 'expected' but he'd have someone else look at it. I wasn't really expecting or looking for a change. But now I've talked to them and I guess they've...

What vinyl are people purchasing for these?

Can someone share with me?

I had issues with my Pixel 2. But it's much more reliable if I don't have my other Bluetooth LE device (fitbit versa) connected. So for me it seems to be high 90s-100% with no versa attached and battery optimization disabled.

Mine have all gotten better with more use.

Well, good to know it's intentional I guess. It doesn't make any sense to me. Especially since it applies the offset even though the UI elements don't even show the offset. Why hide the relative offset UI element if it's still relevant and being used for something?

I noticed some weird behavior, can anyone confirm? Normally when I enable cruise control it defaults to the speed limit or my current speed if it is above the speed limit. (This is slightly different than most cars) But, today I was enabling the speed warning, and I set it to a relative...

I saw a 17000 VIN in the parking lot today and compared to my 14000. It's pretty much the same, and it's wholly dependent on the lighting and angle of viewing. I think some people definitely have it really bad but i don't see any difference from 17xxx to 14xxx VINs myself.

I believe you can, but I also believe that for the most part this is not an issue. Some of these are really bad, but nobody notices mine until i point it out and even then they aren't convinced if it's real or just a trick of the light.

Yeah I'm not saying they all do but it's just way more prevalent than I ever realized before.

I do have to say that now I see this difference on a lot white cars (even non tesla) I've seen. It's pretty annoying that I can't unsee it now.

Yep similar here. Some are way worse than others, and it's very dependent on the lighting White Photos

I kind of wish they'd support widgets for the frunk etc.

Yeah it's definitely not ideal, but at least I seem to have something that works for me in the short term. The frustrating thing is that I don't know what to do with this info. I'd like to share it with Tesla or Google but who knows how to communicate it.

1488x

This probably won't apply to everyone, but I was having a lot of trouble with the phone key so I decided to do some debug. I have a google pixel 2. I removed all other bluetooth devices from my phone except for the tesla, and then rebooted the phone. For 2 days I had a 100% success rate. So...

Saw some posts on reddit about this and I'm curious to know what others are seeing here. r/teslamotors - Had the same issue on my 3, looks like time hasn't fixed this particular problem That OP is a really bad example of the mismatch, and after seeing the post I looked at my car and I can see...

What about the timing is suspect?

I've tried auto park (perpendicular) 4 times now and it's failed 4 times. 3 times it backed up, stopped, and then said 'Auto Park Cancelled' without attempting to drive forward. One time it backed up and bumped the curb (no car to recognize I guess) then stopped and said 'Auto Park Cancelled'...

My experience was weird. I had the key card on the console and was trying to connect but I got the same message. It worked for me by removing the key card from the console and starting the process. Then it connected and asked me to put the key card on the console. So I think you need to start...

First day with mine today. I've already experienced a few times where it didn't work ☹️. Google pixel 2. Firmware 2018.14.13

I'm in Sacramento Area. I think there is definitely something about your delivery center throughput that's part of the equation.

Invited Feb28, configured Mar 7

Just got my VIN. White Aero EAP 14883 in CA

Yes! White Aero VINS are popping up in the spreadsheet again! *crosses fingers*

That seems true to some extent, but there aren't any configs with nobody waiting. So it also has to do with delivery center availability and/or space on truck availability as well.

Yeah, it must be coming soon right? Any day now!

Not a hard delivery date. We were told something like 'a couple weeks'

At least you had a VIN ;). I'm still waiting for my White Aero VIN. Side note, the Red VIN I had and disappeared was replaced by a new VIN Saturday.

I was imagining a comical scenario where the fire affected one car so they took it off the line and then from then on all the cars were off by one in line because someone forgot to increment the vins or something. whatever happened seems to have put a screeching halt to VIN assignments in the...

Those darn Off by One errors!