Search results

Pm’d. Looks like they put the wrong tire on those. Isn’t it supposed to be 245 wide, not 235?

This is toxic behavior and shouldn’t be welcome anywhere.

Sold. Sorry folks and thanks.

Two potential buyers. Trying to finalize with one.

Selling all four Rennstands + Tesla/Porsche adapters. $250 local +$20 to ship Local means Northern VA. No gorgeous bag included. I used these once, but they caused some extreme angles with my lowered 3. So some of the plastic on two of the adapters is slightly bent. At this price, you...

Yeah I’ll echo that these jack stands put your car in extreme angles with the jack points, especially if your car is lowered. My car’s points are bent up, and the rennstand tesla jack point adapters are bent up too. I also didn’t feel safe with the teetering of the car while lowering or raising...

Attached. Dragy by default shows time without rollout. In the previous post you can see on individual pages what it looks like with 1-ft rollout. So the previous post with 3.69 (with 1ft rollout) was probably heavier, lower state of charge, going up slight incline, had worse traction, had...

July Dragy data. Some of these P3Ds have 18” wheels and 100 lb weigh reductions.

I’m confused why they went with a 4-point harness instead of a 5-point harness. It seems like in an accident you can hurt yourself pretty bad in those seats with no side air bag, no helmet (and strange whip lash dynamics without helmet), and getting sucked down where the 5th strap would be (). I...

What tire pressure are you running? Have you tried 49 PSI?

MPP sells two different size rear rotors, and in different posts you mentioned you bought these parts for your dual motor. What is the SKU of the part you ordered? Did you pay $990 or $980? It’s easy to confuse. Hopefully you didn’t buy the wrong part for your dual motor before you upgraded to...

I’ve got a used front set that are in very good shape (32k electric miles from my personal car). I also have a rear set with missing seals that need to be rebuilt and proper seals sourced/added in. I also have a new set of rear wiring harnesses for the rear brakes. The wiring harnesses are...

Bushings arriving this week!!! Very excited for all these suspension parts.

MPP just let me know some 2nd batch orders are imminent: ~1 week before shipping. There’s been some logistical issues that MPP and their suppliers (i.e. the machinist) had to overcome with hard work and self sacrifice due to COVID-19. If anyone gets a shipping notification and isn’t going to...

Oh shoot I didn’t realize the mil and mm difference. Thanks for sharing. Yeah I’m probably crazy off. Gotcha, I can see what you mean on the smooth finish. You have an eye for details, which is awesome. I like the color shifts as well. IMO anything that makes your car unique at the...

I have the matte Suntek film on my blue Tesla. It helps hide some dirt and debris and gives it a very cool unique look. The metal-flakes? They pop through too. So cool. Paint alone or vinyl can't do that. If you don't have a metalic red Tesla, you can't go to a shop and say "hey wrap my car to...

If anyone is willing to let me swap out the rear springs and spring perches with my Unplugged Performance rear springs and spring perches, I will lower the set kit price by $750. We'll split shipping costs. I want to use the MPP lower spring arm, but I can't use my UP spring perch for the 70mm...

Order #1417. Thanks!

RN112744XXX

Sold.

Bump.

NoVA - 20" Winter Tire set for Model 3, Michelin Pilot Alpin PA4. 235/35R20

Thanks! I’ll read more into it. I’ve seen other folks debate this point on BMW forums: some moisture versus salt and mud. Anyone ever try using a coilover cover? Some people sell breathable, removable covers that I’ll take a look at. When it gets wet around here, I can just scissor off these...

Yep! I was in there adjusting height and preload. Height was a secondary goal. I should have not mentioned it. In troubleshooting the noise, I took the car to the service center and asked them to look around the coilovers at stock components. My appointment was primarily for other things. Not...

Hi, I'm selling my set of winter tires from my stock model 3 20" performance wheels. These are a great set and perfect size for your OEM 20" model 3 rims. I'm selling them because I just got a staggered set of winter rims and bought oversized winter tires. The tires are in used condition with...

Thanks for the suggestions! I tried both, except I reduced the preload a little bit because with some ride height changes I was hearing spring skips. Anywho, after 24 hours everything is silent now. And I'm really enjoying the ride again! Thanks!!! Also, while I was in there, I anti-seized...

I’m currently having some creaking noises with the springs on my front UP coilovers. WD40 helped for about 12 hours. Gonna try some marine grease. Seems like common coilover problems, but some help would sure be nice :). Are you all using anti-seize or any lubrication with your coilover...

I’ve got a set of used Michelin Alpin PA4s, 235/35R20. 5k or fewer miles on them. Take offs from my P3D rims from last winter. Located in Northern Virginia.

Exactly. Thanks for finding the URL.

For people ordering the blendmount (120-160ish), if you order a few extra links, you can get the camera to sit very close to the windshield and reduce glare. The out-of-the-box blendmount setup actually reduces visibility and increases glare, and the stock mount sits more flush. Non-white...

I had a hard time with my 08/18 build. Not sure about any revisions like with zip tie or screws. I used old credit cards and pry tools and did one side at a time. It wasn’t easy, and I wasn’t overly forceful to avoid damaging the plastic. I had to wedge two opposite sides at once and push hard...

Yep. Fixed by swapping out junky Home Depot taps with posi-taps (20-22 AWG). Thanks!

Anyone else having issues with this setup? Been working for about a year no problem. Then randomly stopped working sometime in late August. I finally had some time to debug. Getting 13.5V from power source, but presumably not enough current. BlackVue DR900S should work fine 12-24V at 1amp. I...

Bought from another TMC user. Reported this thread to be deleted soon after initially posting.

Looking to buy an extra set of performance rear calipers for my model 3. Thanks!

Nevermind. Bought from @mukeshranjan. Thanks!

Bought. Thanks!

Hi, I’m looking into buying the drivable Tesla Model S for kids from the referral program. I believe it’s called the Tesla Radio Flyer. Thanks!

Hi, I’m looking into buying the drivable Tesla Model S for kids from the referral program. I believe it’s called the Tesla Radio Flyer. Thanks!

Right! That’s why I love giving my money to companies that design and make custom, one-off parts and source most in the USA. I love how my one-off custom mono block forged wheels from unplugged say made in USA (etched right on the face of the wheel). The sway bars from unplugged, which are made...

Who else makes the sway bars? I'm not aware of any. Not trying to provoke any fires here.

I'm starting to get some parts. Not the sway bars but the coilovers, wheels, and fascia. Headliner, rear bumper, spoiler, sway bars and camber arms* are in the queue. I ordered these all at different times, even some like the sway bar as recently as a few days ago. Daerik just got his 2nd...

Hey everyone, BlackVue now supports 256GB cards in many models. This was an unofficial support but recently made official. Check news section of BlackVue site. You can scoop up a high endurance micro sd card for like $55 on amazon.

Sold. Item is no longer for sale.

Genuine OEM Performance Black Carbon Fiber Trunk Lip Spoiler Wing Tesla Model 3 | eBay

OEM White Aluminum Dashboard Replacement for Tesla Model 3 Gen 2 | eBay

For sale, one carbon fiber spoiler for the model 3. This is the OEM spoiler manufactured in March 2019 with the adhesive still intact. I was going to get this spoiler installed by Tesla Mobile Service, but the technician didn't want to put it on my PPF. I prefer a more aggressive spoiler, so I...

For sale, one white model 3 dashboard. This is from my P3D. I am replacing the white dashboard with carbon fiber, so I no longer need this dash. The dash is in excellent condition, but note that there is one slight manufacturer defect from delivery on the driver-side corner. It is not noticeable...

Hey man check my earlier post on this thread. You just need a 10mm wrench, some electrical tape and 5 minutes. You can fix your audio with hard reset. Thanks.

I feel like 255/40R19 should have the same problem (the clearance with the front suspension arm) since the diameter is the same. But depending on the tire and your comfort level with clearance there may not be a problem. I can't talk past @gilscales experience. Works great in that situation. By...