Search results

Hello😬

Ride comfort is better than oem for sure, altho I forgot what oem feels like, all my friends with air ride says their ride comfort is better than when they were on oem springs. It’s far better than my model Y and both my wife and I drive both cars regularly, big difference. Also, I’ve done 1000+...

Don’t have any video on my phone right now, I have posted one on my IG before. but ground to fender I can raise as high as 29” that’s taller than oem spec Login • Instagram

Thanks man, very fortunate to meet the right people at the right time to be able to receive the support, and hard work and saving had got me my air suspension setup. New wheels also coming in the next few months. follow me on ig if you like, peekaystudio, all original contents

haven’t made a post here in a while, forgot how to post a photo

Here's mine in it's latest form

Mine is a 2018 May LR as well, have had this issue a while back but I've always thought it was my lug nuts being slightly under torque. But recently it has become a double click and I can even hear it clicking at low speed driving. I am wondering if any of you with the problem has aftermarket...

Hello, How much for just the 3p management? Thanks

I have the exact same issue, i am TeslaDIY on youtube, i posted about using bloxsport spacers, but now with my BBS, there are no cutout on the back of the BBS so any thinner spacer adapters will allow stock studs to poke thru and without the cutout on the back of the wheels, it won't clear. I...

I actually don't know yet, not Airtekk for sure, UAS seems a bit more expensive, i did have a decent quote from AirDemand. What would you recommend?

Also, I have a question. I know most people are using 3P or 3H setup and no doubt they are the best route, but unlike most, I ain't got much to spend but car is life (kids and mortgage) I am trying to keep the cost low. I am thinking to go with the 3S as it is much cheaper, which also means I...

I had been reading about different options and I had gathered some information from this thread that is useful for me and I thought I'd share it here in case someone else like myself who is looking for the same information. they are basically just screenshot from all 10 pages here...

Thanks buddy, its actually a full carbon fiber trunk, but yes i plan to paint it white, however partially only, the entire top portion will be painted white, leaving the back face exposed carbon. i need to wait until i get a studio photo session with the way it looks now before i can paint it.

Some "noise" is normal, however, contact Ben from Unplugged, he should be able to help you or work something out for you

Car has gone throught some changes over times

I got them from BBS directly however, Maier Racing will soon be carrying their wheels on their website @ MaierEV.com

Got it, i am much familiar with that process, thanks again!

These are 19s and they are 24.8 pounds. I had the 18s Aero prior to this and they are 23 pounds with aero covers handles a lot better since i have better and wider tires.

Oh hey hello there my BBS bro haha

OMG! you weren't kidding, i just checked, it is a thick metal that is on top of the wheel surface! You sir are amazing! haha i would have never knew, thanks for pointing it out. Hopefully its easy to remove

Yes i did, it was a sponsor deal, i reached out and they sent me a free complete kit, but i failed to deliver a finish product, after 6 straight hours, i gave up. I am the guy who created the first DIY chrome delete video on youtube (Tesla DIY). I ripped my vinyl wrapped chrome delete to attempt...

I tried Superwrap, it peeled off along with my masking tape, could be user error, maybe I should have peeled the masking when its wet, but I was trying to spray thicker and multiple coating, so not sure how I can peel it wet since between each layer, I let them dry a bit before I spray new...

Thank you! i have 255/35/19 and at my low height and rather soft spring, it runs the fender liner a bit, i trimmed it and it doesn't rub at all, its super flush to rear fender, however suspension travel allow a natural negative camber which tucks the tires when suspension compress. you can try...

Thank you, front spoiler and sideskirts are mounted with 3M double sided tape and bolted on the bottom using factory mounting hole for what use to be taps. Trunk is direct replacement of the OEM trunk with the inner plastic panel also replaced by a custom carbon fiber replica of the plastic...

Seriously??? i did remove the white vinyl protection film, but the polish brim is there...." not really a polish lip since its like a ring of polish on the outer edge" i will be a big dummy if its removable haha, i will check tomorrow

For this particular style of wheels, they only make them in 19s and 20s. My car is a Non-P version. I think i am fine with the wheel color, but if you look closely, they have a polish lip to it, i feel like polish lip only work on certain cars...like JDM cars in the 90s maybe...i am a MR2 guy...

And here is a quick photoshop of how i want the car to look in the next few months. Painted caliper Painted top side of the carbon trunk Carbon fiber rear skirt add on satin black wheels

Just wanted to share a few photos I took last weekend after finally getting my wheels mounted 1 year and 4 months since I took delivery. It's kind of a unique look and not everyone might like it, but I'd like to share this and maybe someone can be inspired or get an idea of how they go about...

At first, i thought i would want to partial paint front spoiler and side skirt, but when i saw the sideskirts on the car with the front spoiler, i kinda like the theme, however, i really want to paint the top side of the trunk lid, leaving on the back face exposed carbon, below is a photoshop i...

Finally got my wheels, they are: BBS CI-R in Platinum finish 19x9.5+40 squared (want to be able to rotate tires) 255/35/19 Dunlop S1 (got them cheap to see if all fits nicely) Currently, have 25mm Blox Racing spacers in the back and its damn perfect with no rubbing. I want to run 15mm spacers...

Here is my 4" Maier Racing spoiler

20mm front, 25mm rear. on UP low springs 255/45/18 tires you can definitely go wider as far as clearance, but for safety concerns, i feel 25mm is the most i want to go with spacers

No rubbing at all. and i am sitting pretty low. drove 200+ miles to the skiing resort this past weekend, with twisty roads, no rub

haha yeah, i've had 9 different MR2s in the past. i am lowered on 2.1" drop UP Low Springs. i am Tesla DIY on yt

1" wheel spacers are pretty "normal" in fact, many Model 3 owners are running 20mm, I am a bit more extreme and went with 25mm. They do have extended studs, all torqued to factory spec. Even the front 20mm has extended studs. Wheel spacers are pretty much like lower offset wheels, so the only...

Not aftermarket wheels but 20mm spacers front, 25mm spacer rear, blox. most I've seen are 15mm front and 20mm rear. but I think even at 25mm I am still not flushed. but 25mm is the most I would be comfortable with anyway. I can live with this look for a while until I get new wheels

Wondering if anyone is running x10 up front, i don't recall seeing anyone with x10 maybe because either low offset would sticks out too much, high offset the wheels may hit on the suspension strut from the inside? Thanks in advanced.

These are 20s correct?

After looking at my oem center console tray the other day, the one under the armrest. This idea came to me, why not flock the 3D printed tray i printed recently, to match the look of the OEM tray? not only to finish off the 3D printed texture, but also provide a scratch resistance to the surface...

perfect IG account name haha

Yes thats me haha thanks for the support!

sick, i think i saw a video of your car at a car show. got a IG i can follow?

Yes i will be getting it painted sometimes soon

Sharing with you, some photo i took after installing the #UnpluggedPerformance Front Spoiler Also, as always, a new video on this new front "lip" on my youtube channel. Installation is very simple, yet bond strongly to the bumper. Fitment is really good, and quality is like OEM plastic, very...

Photo didn't get properly attached from my last post

Heres my attempt in DIY installation, i am not suggesting this for everyone, but for those who are interested and plan to do this yourself, feel free to take a look at what it'll be like, leave me a comment on the youtube video if you have any questions as i dont check here often (1st post here)...