Search results

Just spotted my powerwall2 has been upgraded to 1.41.2. Hoping Powerwall gets priority over grid back again. Sadly, due to it being a rainy miserable day I’ll have to wait to see.

So, I’d emailed [email protected] the details I shared here. I also emailed them a couple of weeks ago because the Powerwall Gateway had stopped being visible on my wifi. That means my PVoutput info no longer contains the extended data. I’ll place a telephone call to tge UK support...

I’ve had new behaviour on my Powerwall2 today, and possibly yesterday, but not checked out the later properly yet. I emailed Powerwall support for advice, but had no response as yet so I thought I’d ask to see if anybody else has seen this? Config is a Powerwall2 and a gen 1 gateway, not a...

Has anyone fathomed out a way of downloading the stats from Tesla automatically? I’ve used thenew Download button to get a day’s data and would like to get all the data into a spreadsheet, but that will be time consuming and one day per download. I’m keen to get the detailed data rather than...

Well, I was on 1.40.1 but today I noticed the Tesla app reporting I’m now on 1.40.2. Now, using web browser to connect to the gwj, just so I can see the flow diagram it works for some minutes, then loses contact for a few minutes then connects for a few minutes, loses contact for a few minutes...

Went to 1.40.1 here maybe two nights ago and connection to wifi went OK. Had been having troubles after I rebooted my router. I can only assume the new firmware caused the gw to do some searching. @NuShrike .. Custom automation? Can I ask what you are doing please?

Just checked App. I’m now on 1.40.1, must have happened overnight as it was on 1.37 yesterday.

So, not had a chance to progress this today as weather is nice and I’m taking down my conservatory to move it. I cannot see the OW currently looking at attached devices on my Netgear router. As the gw has seemed a bit of a lagard connecting in the past I've patched the mac address to a static...

My gateway is gen 1 (not like mini PW2). The link only took me to info about cars, however a search found Powerwall stuff. I’ll go back to tge paper doc I have somewhere. Note: I only turned off my router, all other devices found the network OK.

I have failed to work out the powerwall's networking approach and seem to communicate with it from my PC by luck sometimes. I had to turn my router off to make some changes to the circuit it was on. On powering back on I can communicate with my SolarEdge Inverter but the Powerwall doesnt seem...

I can answer part of your question, but as I only have one powerwall I cannot give the full answer. My comments below are UK specific (may be valid elsewhere but I do not know if they are). In the UK the powerwall will top up on cheap time electricity if you configure it to do so by setting...

That is a nice interface, is the code available to share? Would have high WAF in my house.

Very valid point, however, on my iPhone 8 Plus the serial number is off the bottom of the screen and gets missed off screenshots. Hmm, I accidentally tapped the name at the top of the screen on the app and it has allowed me to rename my system. Was that there before?

Serial number is a nice addition, but why make it more complex than necessary by needing a tap to reveal it? Apparently also has Swedish language support. I remember when I contacted Tesla just after my install (23/11/18) to say I felt better historic reporting would be good, such as data...

I’m on 1.34.3, however I don’t think that has caused the problem. Might have made it slightly worse. I ccne from 1.33.x and 1.32.x before that during this year. The loss of comms when it happens is for approx two hours, but this time much longer. I’ve seen the weird access also, firefox and...

No, in fact I map the mac address to a set IP address to avoid losing contact. As I remarked before during previous losses of comms after about two hours comms recovers. Comms have recovered with no help from me after seven hours. I wish Tesla had a log I could interrogate on the gateway...

I had an 'interesting' problem develop today. Not quite sure how to tackle it, any recommendations would be appreciated. There was a thunderstorm which resulted in a power outage for maybe 30 seconds. Everything seems to have come back on. However, I can use the Tesla app on my phone to...

I think I’ve been on 1.32.0 for most of the time since my install back in November. I’ve watched others saying they’ve been upgrade but for me nothing. I was reading this thread, stopped to check I was still on 1.32.0 and guess what? Yep, I’ve been upgraded to 1.34.3. Doesn’t seem to have...

So, I had a puzzling new experience in the last week or so... On 23rd March at roughly 14:00 comms with the Powerwall ceased, I tried the app, the web interface from a browser and the PVOuput code failed. Roughly two hours later it just sprung to life again. During the outage on 23rd March...

I just found this post. I’m one of those UK/ Linux (or OSX) guys. I have no Windows (that includes Wine and other emulators). As the post is about three months old I thought I’d ask if you’ve git a working Linux or OSX version of your app? I see the UK bit is covered in latest Windows...

Ha! I'd wondered about your JES2 Id. If you cant script it after 38 years what hope for me is there, I only managed 27 years (after 11 as a customer). (Apologies, a little, off at a tangent humour).

I've kept my battery in Cost Saving mode most of the time. I have to say I've read the explanation of balanced and cant figure out the important difference. Based on @JohnRatsay comment above I think it might be more important during summer months so I have a bit of time to understand it. My...

I have mine set up to charge battery during day from solar and also to top up overnight during cheap period. Currently on Robin Hood Energy Evergreen V7. (Daytime 19.3p, Night 9.6p, sc 21.48 and yearly discount of £22.50 for online management). I've recently tried to find cheaper for my usage...

I found emails get responded to quite slowly, hoever my most recent ine asking for what the app was next likely to be updated got a phone call response. I said that Ihad a problem with battery/gateway and it’s reaction ti weather and the oerson gave me an 0800 number to ring. Planning on...

I have an issue I cannot seem to get around. Over the three months or so of having our installation (5.7Kw of panels and Powerwall 2) we’ve seen quite a few instances of a couple of sunny days getting over 20kW of generation followed by a days of bad weather which is quite understandable for...

Despite my comments about the experience so far I’ve been very happy on the whole. Install date was 23rd November for me and I’d expected not a lot to be generated over the winter oeriod. I’m still learning and definitely glad I went for a solar PV install and glad I added the battery. I’ll...

So, charging from grid works but is not ideal for me based on my (only two months) winter experience. It would be nice to be able to force a top-up. Anyway, it’s been running on Advanced/Cost Saving. Two days ago I changed to balanced. Bad idea, it stopped charging from grid in cheap time...

@Yonki That looks like the same app as I have. However, whatcapoears on mine is a barcat the bottom of the screen that does not scroll. On the bar are two icons, one as described (a bit like an organisation chart) and one like a circle. Tapping the org chart gets array info, tspping the...

So, on the IOS app at the bottom of tge screen is an icon that looks like an organisation chart with one square then jnder it three in a row. Tapping on that get me a view of my panel array with each of the sixteen boxes showing how much they are generating. On the monitoring website it is...

So, you create an account on their website then you get access to your data using a web browser. To best of my knowledge there is not an app (but I could be wrong). Address I use is: https://monitoring.solaredge.com From memory, at the time I had the system installed I think the installer set...

I've only had my installation since November and just posted here for the first time today. I have a Solaredge inverter and the monitoring provided shows the individual panel stats both logically and physically in the array. The data is stored on their server and reasonable historical data...

Hi All, I had a Powerwall 2 installed on Nov 23rd along with SunPowr solar panels and Solaredge Inverter. I appreciate is possibly not a good time to do it, however it took months to get DNO approval as we were above the 4Wh 'notification' line at 5kWh. Located in Derbyshire, UK. Needless to...