Search results

Sorry for the late response... I had it done as a package with the wrap of the car so I got a bit of a discount. The tint alone using xpel ceramic will be around $700-800 if I remember correctly

Mine was fixed at the service center. It was a loose lumbar attachment . Solid as a rock now

Happened to me last month . I ended up taking out the usb drive(and leaving it unplugged) , resetting car , and after car went to sleep cameras and ap worked again . The key was letting the car go to sleep . Still didn’t work after doing just the reset.

I have Xpel clear ppf . Works great on it .

I have used it for 4 months and love it . Put it on the glass too . Does a great job . Only tip is don’t apply in direct sunlight if possible as it can haze over very fast . I ended up buying a gallon of the stuff after I tried the small spray bottle . Also got a cheap hand pump mister off...

My driver seat had a creaking /clicking sound which was very pronounced when you put a side load on the seat. I took it to service and they said it was a loose lumbar attachment . Been about 1000 miles since and zero creaks .

This had never happened once in 2500 miles until after the latest software update . Happened 4 times since . (iPhone XS max )

Versello, for me it turned out to be the stats app. Once I deleted the app and changed my tesla password to decline the login ability of stats , my drain disappeared regardless of usb configuration . It’s now only 1.5 miles per day of drain consistently.

Mine is definitely coming from inside of the seat . Moving it forward has no effect. You can actually re create it with a side to side rocking motion . It’s annoying ! Have to take the car in for service on the turn signal and will have them listen.

I have had the same experience . For me it’s only when going around corners and there is a side load on the seat.

Mako (after the blue shark)

After you leave the car Or poll the car through the app, the car should sleep 11 minutes later . So go back to your app after 11 minutes and see if the app shows its waking up the car . You’ll also know by the drain . If it’s more than 3-6 miles per 24 hours I’d say your car is not sleeping...

Yep only one.

I loved the Stats app but my model 3 wasn’t always going to sleep. I deleted the app and all was good again , so I decided to install Stats again and had the same sleep issue . I have had the app deleted for 2 weeks and not once has the car not gone to sleep. I park my car at the airport a lot...

I’m 46 and bought the blue . I love it. However, I also wanted the silver and just missed out on getting it.

Well holy crap , I’m an absolute idiot . Disregard , makes perfect sense now ! Thanks guys I thought the trunk had to be popped open from inside the car or the app .

I’m curious why Tesla put the Frunk unlock button on the front page instead of the trunk. I use the trunk all the time but don’t want to use the Frunk very often. I wish there was a way to customize which one you wanted on the app which would limit the amount of key presses having to dive into...

You can find places that are cheaper than ap3 but trust me you’ll be very satisfied with the results . One piece on back window (as opposed to some places that have to make a seem ) no bubbles and perfect lines.

Thanks it’s 35 percent so it’s legal in Georgia. It really cuts down on the heat build up .

Ceramic tint on the windows and roof really helps . I was at a baseball game the other day , car in the sun for 4 hours . Outside temp was 82 and car only got to 98 degrees. Also amazed at how quickly the temp lowers when you remotely turn on the ac.

I did do the whole car in Xpel clear. Obviously not cheap but very happy with the install. They did a great job and it’s already saved me a few times.

www.Ap3atl.com They have done dozens of Tesla’s and are very good. I had my car wrapped and tinted with Xpel prime XR ceramic right after delivery. They are in Alpharetta.

Invisible glass !! Buy a can and have some micro fiber towels in the trunk/frunk? Works great and no gas station. Invisible Glass 91164-2PK Premium Glass Cleaner 19-Ounce Can - Case of 2 38. Fluid Pack https://www.amazon.com/dp/B07B4QDZHQ/ref=cm_sw_r_cp_tai_0dIUCbWT0CP9J

Yes it will charge much faster at the super charger, I just got 500 miles per hour at one point at the supercharger in Manchester TN this weekend . Not sure about your second question.

I power wash rinsed it first then the cannon , I have it wrapped and ceramic coated so I never had to even touch the car with a mitt. :):):):) Then a coat of Bead maker after (which I highly recommend on any surface )

For what it’s worth I bought the small electric Ryobi pressure washer from Home Depot this week . I have a big gas one but this is so much more convenient to use for washing cars . It was only $97 and I am very pleased with the results . Used a generic foam cannon and chemical guys soap . You...

My rear USB ports are staying powered all the time , I have two usb small ambient light leds plugged in . Yesterday my phantom drain was 23 miles over 24 hours . I feel like it’s either the rear seat usb lights or my cigarette charger causing this , as it’s the only thing that has changed in my...

Xpel clear full body wrap with ceramic on top . Picking it up later today from the installer. Ap3Atl , same place Kim from Like Tesla had hers done. They do great work if you’re in Atlanta. And for those of you waiting to wrap yours , I dropped it off with only 100 miles and it already had two...

Go team blue ! Anyone happen to have their Blue baby fully wrapped in xpel clear ? Having it done this week.

Thanks ... my bad , I failed at searching the Forum. Thanks for the tip !

Finally got my car . Original order : 2/28 , blue , 19 inch wheels , AP, black interior. Shot down 2018 vin on 3/10, got new 2019 vin with 1 mile on the odometer 3/25. Car is perfect with no issues.

Having my 3 full body wrapped next week in clear Xpel . I want to do the ceramic coating myself . Anyone do it themselves on top of a wrap? Which product would you recommend ?

Guess I was lucky !

This is why I won’t put the more powerful frunk auto open struts on .

Sentry mode is great ,however, I leave it at the airport for 4 days at a time and obviously 100-150 miles of drain makes it a non starter since I want to be able to get home from the airport when I return. Wish it wasn’t such a high energy item , but still glad it’s there.

You guys are killing me ! But congrats nonetheless. I ordered on 2/28 , blue /LR RWD/ 19 inch and nothing (Atlanta area)

I have the exact same configuration ordered on 2/28 . No vin yet after I declined the 2018 build with some miles on it . Delivery rep hasn’t been able to get a time estimate.

I logged into my account today to check status of model 3 order (still waiting for a VIN) . I applied and was approved for financing through Tesla Finance. Got 3.75 apr with Wells Fargo listed under approved terms. I signed the agreement at that point but today when I logged in ,the rate was...

I placed my order for my LR RWD on February 27 th and still no 2019 VIN , After I backed out of the 2018 they tried to give me. I’ve been told they have “ no idea “ as to when I might get a car .

It’s not just the 33 miles (as of 30 day ago so might be more by now) . Also the 5 month old 2018 build . I will wait , already got confirmation they pulled the vin.

Wow thanks for that ! Sure enough it’s in Freemomt and already has 33.8 miles on it ! No thanks

I had to call. I had originally changed my color to silver metallic after my original order. I read they would do it for a small fee. They did and said it was submitted and the change should show up on my account. Days later no change so I called tonight and after a very long hold , The rep told...

Don’t be so sure . I ordered the same car and color (except I got the 19 inch performace wheels .) on the day the prices were reduced. Just got the vin tonight and it’s a 2018. Guessing October-November build. I’m waiting to get verification on Tesla not trying to pass off a demo car. If not...

I have a LR single motor I ordered 10 days ago and they gave me a vin that’s a 2018 ending in 1092xx , I’m trying to figure out when this was manufactured. This has been annoying for sure.