One more pic.Just posting a couple pics of how I tapped.
I was able to use a mirror tap cable.
If you look close there is a slit on one side of the connector that was just wide enough to get the blade in. VERY tight.
I also trimmed the blades shorter.
Not thrilled with how Radar Detector looks from the outside for prying eyes.
I might put a little splash of tint or something to hide it better.
I'd never run a blend mount for that reason. Stands out too much.
Other than that it came out good.
I debated running wire down to Brake Controller. Little harder to hide from Service if they poke around.
I can take the small cap of the mirror cover and tuck the whole wire inside when I have car serviced.
I don't trust ANY dealer voiding warranty on ANY mod.
I didn't like the idea of tapping the camera that is driving the car, but it was so easy and clean.
That little cap was harder to get back on than I expected. It's pretty close to the mirror too.
So I notched it. I might be able to push the wire in without taking cover off. But that might be risky.