Lots of really cool accessories that I looked at but I ended up with these, hopefully you find them helpful for those that are shopping around.
All weather custom fit mats: Tesla Model Y - I was deciding against this one and the 3D Max from Teslarati but went with Tesla Shields instead because the 3D Max doesn't quite fit snugly (as of this writing) on the 2021 model on the front. There is a slight gap because they did not update it for 2021.
I replaced the USB stick that came with the car (highly recommend that you do this) with the Samsung T7. USB Sticks are not meant for dashcams which read/writes very often. Every time that a read/write/rewrite is done, you degrade the drive a bit and eventually, that USB stick is going to fail. If it hasn't failed you already, that means your sentry mode probably doesn't capture much--that's good, but it's only a matter of time and the last thing you want is to have it fail when you need it most. I got the T7 because it had 1TB, the higher the space, the less rewrites it has to do. A cheaper recommendation is this: https://www.amazon.com/SanDisk-Endu...ics&sprefix=micro+sd+e,electronics,234&sr=1-4 - if you go with Micro SD just make sure it's an endurance type--meant for dashcams and frequent read/writes.
Because of the new drive in the glovebox, the drive rolled around a lot so I got this glove compartment divider: Tesla Model Y & 3 Glovebox Divider Organizer -- now the drive sits nicely in the bottom area and I can make sure it's snug so in the case of impact, it is secure.
I have a kid so I had to deal with that--had to purchase the following:
- Seat Protector: https://www.amazon.com/gp/product/B00B7M7BKW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - I liked it because it's rigid -- I have white interior so I want less indentations as possible.
- Kick Protector: https://www.amazon.com/gp/product/B08ZS2J7YT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - looks really good, see below (I only installed it on the right chair in front of the carseat)
- Sill covers: https://www.amazon.com/gp/product/B0932RTPPY/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 - fit perfectly
- Sill protector for the back - the MYP has sill protectors on the front but none for the back where my son constantly steps: for Tesla Model Y 2021 Matte Black Back Door Sill Protector PC Plastic 2pcs | eBay
- 2nd row console organizer: https://www.amazon.com/gp/product/B0771BC3LV/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 it's where I throw the kid's drinks or whatever... can be used as trash too
Car phone holder: https://8bluetech.com/products/h210526b?_pos=1&_sid=a2758172f&_ss=r fits snug on the left side and doesn't rattle but you might be better off getting the one that sits next to the screen if you have a large phone. I have the 12 pro max and I have to remove it at an angle because it's close to the edge and the left windshield and car gets in the way.
Center console organizer: https://www.amazon.com/dp/B093FFF8MV - I originally got the one from Tesla but it was coated in velvet...so it didn't slide very well because it was sliding velvet on velvet :|
I didn't get this but my friend did: https://shop.teslarati.com/products/tesla-model-y-3-armrest-storage-compartment - it fits really well and he puts his phone in there sometimes if he has to leave it.
https://www.amazon.com/gp/product/B078W5RBYB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - Screen protector - does nothing to reduce glare though so if that's a problem for you, choose one that is specifically anti-glare.
Protectant for interior: https://www.amazon.com/gp/product/B000XBCURW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - I use this brand for our outdoor furniture, works great...it's a very good product.
https://ottosteer.com/product/ottoplate-tesla-model-y-fast-release-front-license-plate-bracket/ - Front plate bracket that doesn't block the grill - easy to install, study, perfect for the plate Tesla provides. I didn't want anything blocking the grate in the event that it impacts air flow into the vehicle and it mounts the front plate Tesla provides which is well suited to the curves of the front bumper. The ottosteer comes with foam for the plate so you don't have to adhere the plate to your car. Since my car is wrapped, I didn't want anything to adhere to the outside of the vehicle.
and my car is matte black so: https://www.boringmod.com/products/black-tesla-model-y-on-black-license-844494999 matte black
For the exterior --
I powdercoated my wheels from the gunmetal gray to black with red emblems:
Dynomatt PPF on black (10 year warranty, protects original paint and self heals) -- Ceramic UV tint to reduce UV and heat, windshield protection, front window tint and slight smoke on the lights:
and red for my interior emblem to match
It's really fun to customize your car, my husband is thrilled I enjoy it lol...I hope you guys enjoy customizing your car too
All weather custom fit mats: Tesla Model Y - I was deciding against this one and the 3D Max from Teslarati but went with Tesla Shields instead because the 3D Max doesn't quite fit snugly (as of this writing) on the 2021 model on the front. There is a slight gap because they did not update it for 2021.
I replaced the USB stick that came with the car (highly recommend that you do this) with the Samsung T7. USB Sticks are not meant for dashcams which read/writes very often. Every time that a read/write/rewrite is done, you degrade the drive a bit and eventually, that USB stick is going to fail. If it hasn't failed you already, that means your sentry mode probably doesn't capture much--that's good, but it's only a matter of time and the last thing you want is to have it fail when you need it most. I got the T7 because it had 1TB, the higher the space, the less rewrites it has to do. A cheaper recommendation is this: https://www.amazon.com/SanDisk-Endu...ics&sprefix=micro+sd+e,electronics,234&sr=1-4 - if you go with Micro SD just make sure it's an endurance type--meant for dashcams and frequent read/writes.
Because of the new drive in the glovebox, the drive rolled around a lot so I got this glove compartment divider: Tesla Model Y & 3 Glovebox Divider Organizer -- now the drive sits nicely in the bottom area and I can make sure it's snug so in the case of impact, it is secure.
I have a kid so I had to deal with that--had to purchase the following:
- Seat Protector: https://www.amazon.com/gp/product/B00B7M7BKW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - I liked it because it's rigid -- I have white interior so I want less indentations as possible.
- Kick Protector: https://www.amazon.com/gp/product/B08ZS2J7YT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - looks really good, see below (I only installed it on the right chair in front of the carseat)
- Sill covers: https://www.amazon.com/gp/product/B0932RTPPY/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 - fit perfectly
- Sill protector for the back - the MYP has sill protectors on the front but none for the back where my son constantly steps: for Tesla Model Y 2021 Matte Black Back Door Sill Protector PC Plastic 2pcs | eBay
- 2nd row console organizer: https://www.amazon.com/gp/product/B0771BC3LV/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 it's where I throw the kid's drinks or whatever... can be used as trash too
Car phone holder: https://8bluetech.com/products/h210526b?_pos=1&_sid=a2758172f&_ss=r fits snug on the left side and doesn't rattle but you might be better off getting the one that sits next to the screen if you have a large phone. I have the 12 pro max and I have to remove it at an angle because it's close to the edge and the left windshield and car gets in the way.
Center console organizer: https://www.amazon.com/dp/B093FFF8MV - I originally got the one from Tesla but it was coated in velvet...so it didn't slide very well because it was sliding velvet on velvet :|
I didn't get this but my friend did: https://shop.teslarati.com/products/tesla-model-y-3-armrest-storage-compartment - it fits really well and he puts his phone in there sometimes if he has to leave it.
https://www.amazon.com/gp/product/B078W5RBYB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - Screen protector - does nothing to reduce glare though so if that's a problem for you, choose one that is specifically anti-glare.
Protectant for interior: https://www.amazon.com/gp/product/B000XBCURW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - I use this brand for our outdoor furniture, works great...it's a very good product.
https://ottosteer.com/product/ottoplate-tesla-model-y-fast-release-front-license-plate-bracket/ - Front plate bracket that doesn't block the grill - easy to install, study, perfect for the plate Tesla provides. I didn't want anything blocking the grate in the event that it impacts air flow into the vehicle and it mounts the front plate Tesla provides which is well suited to the curves of the front bumper. The ottosteer comes with foam for the plate so you don't have to adhere the plate to your car. Since my car is wrapped, I didn't want anything to adhere to the outside of the vehicle.
and my car is matte black so: https://www.boringmod.com/products/black-tesla-model-y-on-black-license-844494999 matte black
For the exterior --
I powdercoated my wheels from the gunmetal gray to black with red emblems:
Dynomatt PPF on black (10 year warranty, protects original paint and self heals) -- Ceramic UV tint to reduce UV and heat, windshield protection, front window tint and slight smoke on the lights:
and red for my interior emblem to match
It's really fun to customize your car, my husband is thrilled I enjoy it lol...I hope you guys enjoy customizing your car too