285/35 on 22x9.5 in front

[gigacar]

Grabbed some aftermarket wheels that are 22x9.5 15mm ET. I'm going to put on all 4 corners.

Would be nice to get 4 of the same tire for MX100d.

I'm hoping they look okay and don't fling road debris up on the drivers mirror, haha

Anyway, wondering if anyone has tried 285/35's in front and rear.

How about anyone running 9.5's in front?

Any thoughts on if I'm going to mis-treating the car running a non staggered set of 22's?

Let me know your thoughts!

 

[gigacar]

Update
285/35R22 on Conti DWS06 didn't fit great in the front on 9.5" w/ 15mm offset.
Rubbed slightly in reverse with full turn on wheel well.
Probably not a huge deal, but also probably not worth it just so you can rotate wheels. 265s working great!
Also 15mm offset on 9.5" in front is aggressive looking, but works ok.

 

[Rkilian]

I’m looking at the same setup 285 on all corners on 22x9.5 wheels but with the normal offset; did your tires rub on the inside or outside edge?

 

[gigacar]

Inside

 

[gigacar]

Maybe normal offset would work for some reason. The tire shop just put one on and we checked moved it to the back after it rubbed. Most the bigger shops will bring in an extra 2 tires for no charge so you can try it.

 

[B2FiNiTY]

Need some pics!

 

[HugoBoss]

The reverse grinding might not be the tire but the actual rim. When tire shop put the rear rim on the front by mistake I also got a rubbing sound in reverse. When rim was removed you could see it was the rim rubbing not the tire

 

[gigacar]

Kinda dirty, but here are some.

 

[HugoBoss]

Nice, you lowered or just low setting?
Fills wheel well nicely

 

[gigacar]

Nice, you lowered or just low setting?
Fills wheel well nicely

Neither

 

[Vten]

Car look great with those wheel specs! Im going to try to fit a 22x10 w/285/35 all around with 24 offsets soon. I’ll post pics as soon as I get them mounted on the car.

 

[European_web]

Car look great with those wheel specs! Im going to try to fit a 22x10 w/285/35 all around with 24 offsets soon. I’ll post pics as soon as I get them mounted on the car.

Should work, I am running 22x10 all around 265x35 + 285x35 no rubbing issues et 40

 

[Vten]

Should work, I am running 22x10 all around 265x35 + 285x35 no rubbing issues et 40

Nice to hear that ! Do you have any picture ?
Thx u

 

[European_web]

Nice to hear that ! Do you have any picture ?
Thx u

Sure

 

[Vten]

That look awesome ! Are the front wheels poke out a little from the fenders or are they flush in with the fender ? Thx u

 

[European_web]

That look awesome ! Are the front wheels poke out a little from the fenders or are they flush in with the fender ? Thx u

Thank you. They are actually right where the original 20 inch slipstream were.