3D Maxpider Kagu mat for Refresh MS - need volunteer for scanning

[Pinot.Noir]

Any updates from Kagu on when the newly scanned version for 2017/2018 will be available for purchase? Did anybody actually get their Model S scanned?

 

[Astraviel]

I received my 3D Maxpider mats for my 2018 Model S a few days ago. After reading this thread I was going to return them because of the so-called bump on the backseat mat, but after putting it in my car I can't even notice it unless I push with my hand. It's nearly imperceptible. Most of that bump is due to the way it was folded in the box.

 

[Trunk Gap]

I actually love the OEM mats. Super soft. They don’t hold up well, but I enjoy barefoot driving w those mats

 

[Pinegreen]

Does anyone have a contact email for the company? The only one I get when I Google is one that is located in Malaysia.

3D MAXpider Mat | | Malaysia

I'm having some issues with my front set (Maxpider Part# L1TL00011509) for a 2017 MS 75D. It has to be repositioned every 2 to 3 days...and even repositioned, I have to pick a side for the floor mat to be flush with. If I bias it over to the door sill side, then the floor mat's "lip" leaves a gap between it and the center console. Of course, the same thing happens to the door sill side if I bias the placement to the center console side. Getting in and out of the car ends up sliding the mat every 2 to 3 days. Does anyone else have this issue? Also, the plastic emblem is coming off...but that is just a minor gripe for me. Btw, mats purchased 11/30 and shipped 12/28/17 (there was a back order for quite some time before).

 

[MWMiller]

Does anyone have a contact email for the company? The only one I get when I Google is one that is located in Malaysia.

3D MAXpider Mat | | Malaysia

I'm having some issues with my front set (Maxpider Part# L1TL00011509) for a 2017 MS 75D. It has to be repositioned every 2 to 3 days...and even repositioned, I have to pick a side for the floor mat to be flush with. If I bias it over to the door sill side, then the floor mat's "lip" leaves a gap between it and the center console. Of course, the same thing happens to the door sill side if I bias the placement to the center console side. Getting in and out of the car ends up sliding the mat every 2 to 3 days. Does anyone else have this issue? Also, the plastic emblem is coming off...but that is just a minor gripe for me. Btw, mats purchased 11/30 and shipped 12/28/17 (there was a back order for quite some time before).

That really doesn't look right to me. I just put mine in yesterday and there are no gaps. See my post earlier in this thread for my pictures as reference. Hopefully you can get the shop you bought from to send a new one to try.

 

[heed91]

Thanks, that is very helpful. I assume you have a recent Model S?

Yes a new MS75D

 

[umamahesh9999]

I recently bought a used 2017 Model S.
After looking at various posts, it seems like many members recommend "3D Maxpider Kagu mats"
Are these still the top floor mats? or is there something better now?

 

[Joe Car Stuff]

They are still the most popular choice. If you order from joecarstuff.com they give you an 11% discount with free shipping in the continental USA with coupon code TMC at checkout.

 

[umamahesh9999]

Hi Joe
Can I do a custom order without the 3D logo?
That logo is a bummer.

 

[NewTMSMan]

Hi Joe
Can I do a custom order without the 3D logo?
That logo is a bummer.

Agree but you don't notice it after a while.

 

[IGotEastBay]

@Joe - does the rear cargo liner you carry for the MaxPrider Mat fit a 2017 Model S?

 

[umamahesh9999]

Agree but you don't notice it after a while.

Thanks. Ordered it anyway since I couldn't find anything else that I liked better.

 

[PhilDavid]

They are still the most popular choice. If you order from joecarstuff.com they give you an 11% discount with free shipping in the continental USA with coupon code TMC at checkout.

Any way to order without the super tacky/ugly logo?

I don't know what they were thinking before they defaced the mats with that logo.