Accessories for 2021 Refresh Model S Plaid/LR

[iyordanov]

Thanks! Just an update - I found that I can improve the corners of the dash and rear door so I will do that today/tomorrow and all interior wrap orders will ship on Monday.

 

[cwanja]

Hey guys

I just released the full interior wrap for the new Model S. So if you have the wood trim and want to change it, here is a cheaper alternative than replacing all the trims:

Interior Wrap for Tesla Model S (Plaid & Long Range, Refresh) - includ

Product Features 🏁 Covers the center console, front cupholder, rear seats cupholder, lid above the front cupholder, dash trim (in 2 pieces), door trims, rear seats wood trim. 💎 Precision digital cutout, that fits perfectly and is easy to install with video instructions 📐 Carbon fiber patterns...

twraps.store

View attachment 742928

View attachment 742929

View attachment 742930

View attachment 742931

How does this look / feel over the "natural" gashes / texture of the wood? I figured that would be hard to wrap over.

 

[iyordanov]

How does this look / feel over the "natural" gashes / texture of the wood? I figured that would be hard to wrap over.

The textured vinyls that I released so far completely hide those (carbon fiber white and black, matrix black and shadow black). But I tried with non textured ones (matte and glossy) and the wood grain shows. Will be doing some experiments later today to see if I can cheat it will try two layers of the same vinyl and if that doesn’t work I will try PPF layer and then vinyl layer on top. But even if that one works it will be pretty expensive (plus double the install time) because PPF is pretty expensive. Will report later
As for adhesion and installation difficulty - I found it rather easy to install with textured vinyl and it sticks great. You can also remove it without issues (I had mine for about 2 months and then removed it to make product photos and I had zero issues). The non-textured vinyls though were pretty hard to install without wrinkles. I suppose it’s possible if you know your way around handling vinyl and you do it with a lot of patience. With carbon fiber and such though it’s pretty easy imho.


Here is the wood grain showing under pink glossy 3M.

 

[WilliamG]

That sounds scary If I break a clip, I'd be looking at months of waiting for a replacement. Still waiting for a passenger side A pillar (mine was faulty at delivery), 5 months after delivery.

I watched a few videos on this. You’re unlikely to break a clip.

 

[cwanja]

As for adhesion and installation difficulty - I found it rather easy to install with textured vinyl and it sticks great.

Appreciate the response. The keycard wraps were damn tricky around the E S and A of TESLA.

 

[iyordanov]

Appreciate the response. The keycard wraps were damn tricky around the E S and A of TESLA.

Haha I know… but installing a big piece is actually easier in a way because it’s easier to hold.
I am now starting to edit the install video for the entire interior wrap...will post here when done, should be in a few hours.

PS I just tried sticking 2 layers of 3M gloss pink on top of each other, to see if that eliminates the wood texture. It does not. Then I tried putting 2 layers of 8mil XPEL PPF first, and then the two 3M layers, thinking that must do it. It did not

Photo proof:

 

[iyordanov]

Here is the full install video for the entire interior trim wrap (might take another hour or so before the 4K version is processed by YouTube)

 

[Greeney]

Here is the full install video for the entire interior trim wrap (might take another hour or so before the 4K version is processed by YouTube)

Simple!

 

[BlueBlueBlue]

Anyone have any recommendations for a sunshade for the front windshield?

 

[impastu]

Anyone have any recommendations for a sunshade for the front windshield?

Amazon Basics has a medium and large generic one…unsure which will fit best. Many people tint windshield at 70% to good effect. Sorry if no news here for you.

 

[iyordanov]

Special thanks to @Greeney for pointing out that the carbon fiber's pattern should follow a meaningful direction between all components so it has a natural flow of pattern (something you don't naturally get when you cut the pieces in the most optimal way to reduce material usage).
Also made alternative for the dash where it consists of 3 pieces instead of 2, will be shipping both for each order from here on.
That turned out a masterpiece! Here are some pictures, with a banana for scale!

 

[Daniellane]

I received the Snow Chains For my PLAID S.
Unboxing…
2021 Tesla Model S Snow Chains

 

[jebinc]

I took delivery of my Model S Plaid last Friday. It was then in the detail shop for PPF and window tinting until mid-week. I am waiting for a sunny day (that I hope will be this weekend) to take some pictures and post in the forum. In the meantime, I found these shoulder pads on eBay and placed an order hoping they would be here by the end of the year (as they are shipped out of Russia). I placed the order on October 28. The shoulder pads shipped on November 2 and arrived on November 12. I am really pleased with the product. Here is how they look in the car:

View attachment 732624View attachment 732625

I ordered these based on your post. Worst experience in a long time. First, seller says 10-14 days. After a month, seller is evasive and refuses to resent or refund. Goes radio silent. I would not recommend anyone here take a chance in this one. I would consider this a scam, more than anything else. Perhaps you got lucky. I did not.

 

[impastu]

I ordered these based on your post. Worst experience in a long time. First, seller says 10-14 days. After a month, seller is evasive and refuses to resent or refund. Goes radio silent. I would not recommend anyone here take a chance in this one. I would consider this a scam, more than anything else. Perhaps you got lucky. I did not.

I got lucky also...ordered and arrived within two weeks if I recall correctly.

 

[omarsultan]

Any have any luck with something to get the rear T badge to match the rest of the trim--wrap, replacement, etc?

 

[jebinc]

I got lucky also...ordered and arrived within two weeks if I recall correctly.

See attached. Seller refuses to take responsibility for lost package. Again, they chose the shipping method and logistics companies, not me.

 

[KingsT910]

Just got my phone mount for my S, works great so far.

Rotatable and it's suction cup for easy to take on and off if needed.

Bought it from 480° Rotation Car Mount for Tesla

 

[Greeney]

Any have any luck with something to get the rear T badge to match the rest of the trim--wrap, replacement, etc?

I haven’t found anything yet, and apparently the Amazon replacements for the front don’t fit the refresh

 

[iyordanov]

Any have any luck with something to get the rear T badge to match the rest of the trim--wrap, replacement, etc?

This is for the new MS so it fits...not a full wrap as it leaves a tiny amount of chrome visible, but does a pretty good job:

Trunk Letters + Emblems (Trunk/Frunk/Wheels) Vinyl Covers for the 2021-2022 Tesla Model S (Plaid & Long Range)

Product Features 🏁 Made with premium weather-rated vinyl (we use 3M and Avery Dennison) 💪 Install in under 10 minutes. Easy to remove/replace without any residue. 💎 Precise digital cutout 🇺🇸 Made in the USA What's Included (2021+ version) 1 set of "T E S L A" trunk letter decals 1 trunk logo 1...

twraps.store

 

[omarsultan]

This is for the new MS so it fits...not a full wrap as it leaves a tiny amount of chrome visible, but does a pretty good job:

Trunk Letters + Emblems (Trunk/Frunk/Wheels) Vinyl Covers for the 2021-2022 Tesla Model S (Plaid & Long Range)

Product Features 🏁 Made with premium weather-rated vinyl (we use 3M and Avery Dennison) 💪 Install in under 10 minutes. Easy to remove/replace without any residue. 💎 Precise digital cutout 🇺🇸 Made in the USA What's Included (2021+ version) 1 set of "T E S L A" trunk letter decals 1 trunk logo 1...

twraps.store

Cool--which color I closets to the blacked-out trim?