-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Aftermarket Wheels on Model 3
- Thread starter kbecks13
- Start date
silentcorp
Member
dmd2005
Active Member
Swapped out my VS03 to a fresh set of SV107. The SV107 wheels look a little lower key than the VS Forged IMO...I like them both though.
Didn’t had a chance to get better pics of the Signature wheels as it started raining tonight.
Didn’t had a chance to get better pics of the Signature wheels as it started raining tonight.
Attachments
DirtyT3sla
Member
EVS Motors
Former Vendor
EVS Motors
Former Vendor
We're back at it again with another awesome wheel promo. Like our other promos, once the sets sell out, it's over!
The newest addition to the Vossen CV Series, the CV10 is a new take on the classic, concave styling that originally defined the Vossen brand. A complex, bi-level spoke pattern is accentuated with the two-tone Silver Polished standard finish, while Satin Black creates a menacing alternative.
Vossen Wheels CV10
Size: 20x9 / 20x10.5
Fitment: Non-performance and performance Model 3's
Finish: Satin Black or Silver Polished
MSRP: $2200 + shipping
Special Pricing: $1899 shipped in the continental US.
Only 3 sets left in Satin Black and 1 set in Silver Polished.
We are also selling 1 pre-owned complete package, if you're looking for an incredible deal. No curb rashes or dents.
Package includes:
Rims: CV10 in satin black
Tires: Michelin Pilot Sport 4S tires (lightly used--200 to 400 miles) - 245/35/20 | 285/30/20
TPMS sensors installed
Mounted and Roadforced Balanced
*lug nuts not included*
MSRP on entire package: $4800
Special Pricing: $3650 shipped in the continental US. Only 1 set.
If you have any questions, it's best to pm me or call 888-878-2213. Thank you.
Bump! Besides this special deal, I also have deals on
Vorsteiner VFF-109 in Zara Gray (1 set left)
Brixton RF7 wheels in Satin Anthracite (2 sets left)
Pm me if you want more info on those deals.
Mysta
Former Vendor
eCharcoal
Member
Anyone have aftermarket 19” wheels? Without lowering the car? Seems like most of the wheels in this thread are either 18” or 20”.
Check out my wheels at #1145. Those are 19 x 9 +35 with 255 40 tires. Notice that the sidewalk is slightly taller than 245 40.
Burrito
Member
eCharcoal
Member
Was thinking about getting 9.5 up front. What’s the ideal offset for putting 9.5 up front without getting too close to the inside and not sticking out too much on the outside.
dmd2005
Active Member
I was speaking with the Signature Wheel rep on here and he suggested for 20x9.5 front +35 and rear +28 on a P3D for a flush look. +35 square look would have the wheel tucked in at the rear. 19’s should have the same offset.
I have 20x9 +35 on the front of my car and it's already flush is not a little past 9.5 might be too wide for front.
dmd2005
Active Member
Well, I’ll know in 3 weeks if 20x9.5 with +35 is too wide in the front as I have a set of Sig wheels on order.
destructure00
Active Member
18x9.5 +35 Konig Hypergram
265/40-18 Hankook Ventus R-S4
Got them for track use. Fits with no issue on P3D+
Plenty of front tire clearance. I have thicker rotors that are similar to having a 3mm spacer, but even without that they would be fine.
Rear caliper clearance. Konig says these don't fit, but they do.
265/40-18 Hankook Ventus R-S4
Got them for track use. Fits with no issue on P3D+
Plenty of front tire clearance. I have thicker rotors that are similar to having a 3mm spacer, but even without that they would be fine.
Rear caliper clearance. Konig says these don't fit, but they do.
Last edited:
Similar threads
- Marketplace listing
- Marketplace listing
