You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Did not notice any change so far.Anyone with the update, was there any change to how the air suspension heights are controlled? (Hopefully reverted back to how it was and not needing to press 'Keep' every 2 mins).
Mine doesn't do that. I set it to Low always and it just stays there.Anyone with the update, was there any change to how the air suspension heights are controlled? (Hopefully reverted back to how it was and not needing to press 'Keep' every 2 mins).
..... It would have been nice to be able to close the window from the app.
Oh, there is a lot to repair for AP1, at least in Europe.Because there isn't much to tweak (AP1)
This is all clear but why can’t they adjust the windows if they know that the notification is false base on the sensors that thinks windows are slightly open? They should know the travel length the window takes if opening the door. At least this much can be tolerated to allow to set it back remotely?They will not allow you to do that, due to safety issues.
I have had situations with the recent SW ver. 36.11 that the camera reads (LED matrix) speed limit 50km/h to 80km/h and accelerates accordingly.Oh, there is a lot to repair for AP1, at least in Europe.
Example: we have dynamic speed limits that adjust to traffic situation. Normal is 80, with heavy traffic it's 60. km/h of course. 80 is OK for AP to accept, but when 60 is recognized and displayed the car sometimes sets 150 and accelerates immediately.
I actually stopped using PIN to drive as it is too easy for passengers to see what is the code. Might want to try it again in this new version.
Oh, there is a lot to repair for AP1, at least in Europe.
The Camera reads speed limits correctly and the IC displays the limit correctly. Nevertheless, long pulling the AP lever sets whatever is in the maps or just makes up some numbers. This leads to sudden acceleration in very unsuitable situations.
Long pulling to take over the displayed speed limit is completely broken and useless and very dangerous. (Since 2019.28 or 2019.32)
Example: we have dynamic speed limits that adjust to traffic situation. Normal is 80, with heavy traffic it's 60. km/h of course. 80 is OK for AP to accept, but when 60 is recognized and displayed the car sometimes sets 150 and accelerates immediately.
I have had situations with the recent SW ver. 36.11 that the camera reads (LED matrix) speed limit 50km/h to 80km/h and accelerates accordingly.
Setting the displayed speed from the IC worked perfectly well until 2019.28.x or 2019.32.x. It's not about Tesla liking MobileEye or not.Unfortunately the chances of AP1 having improvements are slim to none. AP1 was developed by MobileEye and Tesla severed their relationship with them in 2016 (and then they were bought out by Intel in 2017 and hence the change to AP2 at the same time) so there wont ever be any more partnership/development for the platform in our car. That is why I said "Because there isn't much to tweak (AP1)" is because Tesla cant.
Well begin 2020, they did change AP1 behaviour to comply to some shady new EU regulation and really nerfed it: EU AP1 cannot take turns too sharp anymore and lane changes instead of being immediate now wait 2 sec before proceeding, with a max of 5 sec or so to complete or it aborts.... is because Tesla cant.
It's not the passengers I worry about, it's the possibility of a relay attack and someone taking my MS.
Mine actually did the very same thing. And another weird thing it cut my charge rate in half after the update. I unplugged and plugged back in and went straight back to 40amps and hasn’t had the issue since. I don’t usually have the car plugged in at home when we do the updates so maybe this is normal. The locking thing hasn’t ever happened before.I got 2020.40.9.2 on Friday. One thing happened I've never seen before, the car was locked after the update. I never lock the car in the garage. When I went out to check on the update and unplug the car (I have to unplug it overnight after an update), I found the car was locked. I didn't have the key, but happened to be carrying my phone which I normally never do around the house. I used the app to unlock the car for the first time.
One thing happened I've never seen before, the car was locked after the update
No speed bumps in your town?Mine doesn't do that. I set it to Low always and it just stays there.
I drive very slowly over them. Why?No speed bumps in your town?
Mine actually did the very same thing. And another weird thing it cut my charge rate in half after the update. I unplugged and plugged back in and went straight back to 40amps and hasn’t had the issue since. I don’t usually have the car plugged in at home when we do the updates so maybe this is normal. The locking thing hasn’t ever happened before.
Back in September and October 2019 after installing 2019.32.1 and 2019.32.11.1 my car was unlocked after installing the update. Back then I used to start the update and leave and lock the car while the 2min countdown was running.
BR! Oaito.