Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Cabin filter cover has no screw

This site may earn commission on affiliate links.
So, I went to replace my cabin filter this morning, and there was no T20 torx screw. In fact there was no screw at all! I attempted to pop out the top of the cover but it's really stuck in there. Any suggestions?

Capture.JPG
 
Just to make sure- are you looking at the filter cover? The center of your photo is not the filter cover. The cover is all the way forward where the orange wires have 2 clips. The screw is at the very top and difficult to see without a good light and crawling head first into the foot well.
I believe the screw is in there. Without it, the cover would fall to the right.
 
Just to make sure- are you looking at the filter cover? The center of your photo is not the filter cover. The cover is all the way forward where the orange wires have 2 clips. The screw is at the very top and difficult to see without a good light and crawling head first into the foot well.
I believe the screw is in there. Without it, the cover would fall to the right.

That would explain things. 🤦‍♂️