glhs272
Unnamed plug faced villian
What you wrote will definately work, although if one complains loud enough, the SC will reset the battery info manually, and you will get the same results without the range charges.
From a range calculation standpoint, resetting the battery info will fix the "calculation related" range loss indicated. But, if the battery were in fact significantly out of balance, then maybe not.
Wk057 stated earlier up thread that the balancing circuits don't kick in unless you charge to >93%. Guessing that the reason for that is it needs to be at a high state of charge to accurately calculate the differences in capacity/voltage at the group level. I don't know if that is true, but if it is then the only way to "fix" the battery is to range charge it. I don't see any other way around that, short of disassembling the battery and manually balancing it.
Of course if the battery had a weak module or group of cells then nothing will ever get that range back, short of replacing the module. It sure would be nice to have access to the diagnostic screens so we wouldn't be so much in the dark about what's going on inside the battery.