Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Dedicated Pearl White Picture Thread

This site may earn commission on affiliate links.
14581D6B-69C7-4F62-ABE9-3883597F1ECB.jpeg
68FB7EB3-A937-4F9F-8C41-B29BDFCA9D3B.jpeg
EADAC000-BBEC-422E-B98D-8D2E7A5906D1.jpeg
 
Decided to add a little more white for pop on my interior (brightens it up with the 20% tint). Interior lighting has been upgraded and added rear footwell lights from AO. White parts added include steering wheel bezel wrap, center console wrap, rear a/c vent cover, rear lower console cover, steering wheel logo wrap, stalk covers, seat control covers, floor mats - will leave the rear black liner out until I have passengers). What can I say, I like the contrast.

1.jpeg


2.jpeg



3.jpeg



4.jpeg



5.jpeg
 
  • Like
Reactions: LionXng and Dayreg
All rolling windows supposed to be 35%. I’m thinking the reason why the rear looks darker is due to the rear windshield being 20% but 🤷🏻‍♀️.
Sorry man, but IMO no way the front and back windows are the same. If you like it that'd awesome - I think it looks great, but if you paid for something you didn't get I'd have them redo either of the 2.

Looks like front 35, rear 20 to me.
 
Decided to add a little more white for pop on my interior (brightens it up with the 20% tint). Interior lighting has been upgraded and added rear footwell lights from AO. White parts added include steering wheel bezel wrap, center console wrap, rear a/c vent cover, rear lower console cover, steering wheel logo wrap, stalk covers, seat control covers, floor mats - will leave the rear black liner out until I have passengers). What can I say, I like the contrast.

View attachment 655818




View attachment 655820

Can you share more info on the white floor liners you bought?
 
Got them from LUCKEASY on alibaba. Like them because the have the separate clip in floor mats. I was surprised with the build quality. Time will tell how they hold up, but i'll run them through the summer, and maybe toss some 3d mats over the top in winter up front if I need to. My rear seats get little traffic, so I'me keeping the rear-mat in the sub boot. divers get's 90% and passenger 10%.

link to these mats here:

TBH they came a lot faster than i was anticipating - i'd say a week and a half.
 
Got them from LUCKEASY on alibaba. Like them because the have the separate clip in floor mats. I was surprised with the build quality. Time will tell how they hold up, but i'll run them through the summer, and maybe toss some 3d mats over the top in winter up front if I need to. My rear seats get little traffic, so I'me keeping the rear-mat in the sub boot. divers get's 90% and passenger 10%.

link to these mats here:

TBH they came a lot faster than i was anticipating - i'd say a week and a half.

Thanks for the info and link! They look great but shipping $ is kinda holding me back.
 
Sorry man, but IMO no way the front and back windows are the same. If you like it that'd awesome - I think it looks great, but if you paid for something you didn't get I'd have them redo either of the 2.

Looks like front 35, rear 20 to me.
I just sat on the back and you’re right, the rear is 20%. I don’t mind it but I will just inform the owner of the wrap place where I got it installed.
 
Just a heads up on the white mats, I did put my maxpider on top only for the driver side. I use the dead pedal a lot and it makes the white get dirty. I also tend to scrape the side of the go pedal. Haven't figured out to prevent this yet. I thought about wrapping it with clear or white. Maybe I need to scoot my seat back a bit or just stop being so lazy with my foot.

Besides these small few issues, I still like them a lot. Gives the whole car a different feel inside.

tesla_whiteMats.jpg
 
  • Like
  • Informative
Reactions: imschur and TypeRx
Got my 2019 Model 3 Performance in March 2020 (demo) - now has >15,000 miles on it. Fantastic car. Missing from the pic is my Ikon front lip as the pics are probably from 6 months ago.
 

Attachments

  • IMG_6535.jpg
    IMG_6535.jpg
    837.8 KB · Views: 163
  • IMG_6536.jpg
    IMG_6536.jpg
    794.3 KB · Views: 155
  • IMG_6538.jpg
    IMG_6538.jpg
    755.1 KB · Views: 139
  • IMG_6540.jpg
    IMG_6540.jpg
    911.9 KB · Views: 130
  • Like
Reactions: Gatsojon
Just a heads up on the white mats, I did put my maxpider on top only for the driver side. I use the dead pedal a lot and it makes the white get dirty. I also tend to scrape the side of the go pedal. Haven't figured out to prevent this yet. I thought about wrapping it with clear or white. Maybe I need to scoot my seat back a bit or just stop being so lazy with my foot.

Besides these small few issues, I still like them a lot. Gives the whole car a different feel inside.

View attachment 656007
Thanks for the heads up - I was going to ask where the wear occurred and this helps me a lot. I velcro'd the foot pedal cover I already had (from amazon) onto the white mat, and added some 3M white satin wrap I had leftover by the accelerator. Maybe this will do the trick. I probably will pick up some 3D mats to use in the winter this fall for the added coverage. Maybe by then they will have listened to customers (or potential ones in my case) and done something about that heinous logo badging thing they do.
 

Attachments

  • 1.jpeg
    1.jpeg
    497.6 KB · Views: 138
Last edited:
Finally got the looks where I want it...
Exterior mods:
  • Dark Satin Gray chrome delete
  • Color matched (painted) door handles
  • Factory performance spoiler
  • Eibach springs
  • 15/20mm Blox spacers
  • 35% tint
  • Working foglights (this is an SR)
 

Attachments

  • 20210615_193812.jpg
    20210615_193812.jpg
    535.3 KB · Views: 157
  • 20210615_193922.jpg
    20210615_193922.jpg
    549.1 KB · Views: 147
  • 20210606_202435.jpg
    20210606_202435.jpg
    614.8 KB · Views: 125
  • 20210606_202515.jpg
    20210606_202515.jpg
    356.8 KB · Views: 113
  • 20210606_202455.jpg
    20210606_202455.jpg
    350.4 KB · Views: 97
  • 20210615_193832.jpg
    20210615_193832.jpg
    408.5 KB · Views: 97