You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Absolutely happy to help out. Let me know if you have any other questions.Thanks! And thank you for the repair kits. Huge help to all of us Tesla owners!
Same here - It seems there is not much which can be fixed on gen3, if the motor still works its maybe the sensor (1066379-00-A), but its not sold seperately by Tesla Gen 3 door handle - Replace sensor - if nothing works it could be the sep. controller unit (1069651-00-*) or the motor which is again not sold sep.I bought everything to fix a gen 1 or 2. I guess i need to research fixing a gen 3 now.
This is a calibration issue with the handle. It has to be "taught" where "in, out and open" are which requires toolbox to do this. So you're at the mercy of Tesla. It's possible the paddle gear has broken as the redesigned piece is still cast and still breaks the same way the older version do. Our paddle gear is interchangeable with GEN 3 as well. You now have 2 different modules there is one mounted to the door and one on the handle and both have issues that only Tesla can fix.The handle presents fine. The door opens fine. however, once the door closes, the handle does not retract. I have to smack it with my hand, then it pops back out, then retracts fine
it is very odd.
You're 100% at tesla's mercy for how to fix this handle. You need to initialize using toolbox to get it to work properly. The paddle gear is the only thing that is serviceable from Evtuning.comSame here - It seems there is not much which can be fixed on gen3, if the motor still works its maybe the sensor (1066379-00-A), but its not sold seperately by Tesla Gen 3 door handle - Replace sensor - if nothing works it could be the sep. controller unit (1069651-00-*) or the motor which is again not sold sep.
I bought everything to fix a gen 1 or 2. I guess i need to research fixing a gen 3 now.
i am puzzled as to why this was there
You're 100% at tesla's mercy for how to fix this handle. You need to initialize using toolbox to get it to work properly.
As posted above this handle is on lastest gen and has no obvious hardware defects
The hall sensor is the one mounted in the handle with the magnetic stop sensor? > see attached picturehow the hall effect sensor is attached and the glue can let go
You mean simply disconnect the old 12V battery in the frunk for a minute?or just reset 12v and have it work again.