Hansshow only offers 1 version of the kick sensor. Haven't tried fitting the frunk sensor to the factory Hatchback/Trunk, but it seems feasible.
-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Vendor eas | Southern California Tesla tuning source and daily showroom
- Thread starter tom @ eas
- Start date
Another set of MPP Coilovers installed and ready to hit the streets!
Last of the Adro kits being shipping out today:
Now taking orders for the next shipment due in August and announcing individual Adro componets are now available for purchase! See Vendor - eas | ADRO Tesla Model Y Carbon Fiber Program released for full details, links and pricing.
Now taking orders for the next shipment due in August and announcing individual Adro componets are now available for purchase! See Vendor - eas | ADRO Tesla Model Y Carbon Fiber Program released for full details, links and pricing.
how much did the coilers drop the car?Another set of MPP Coilovers installed and ready to hit the streets!
You get a lowering range of 1.0-2.0 inches if desired. Some even keep at stock height.
Another set of Eibach springs install for this MYP, check out that metallic flake!
Hard to beat Volks on MYP. Coming back for an Adro Full Carbon Aero Kit next!
The August Adro shipment came in ahead of schedule, Here's what's remaining for Model Y. PM me to get yours before they are gone.
ADRO - Carbon Fiber Front Lip - Tesla Model Y - SOLD OUT (preorders beingtaken new for 9/22 shipment)
ADRO - Carbon Fiber Trunk Spoiler - Tesla Model Y - SOLD OUT (preorders beingtaken new for 9/22 shipment)
ADRO - Carbon Fiber Rear Diffuser - Tesla Model Y - 3 remaining
ADRO - Carbon Fiber Side Skirts - Tesla Model Y - 3 sets remaining
ADRO - Carbon Fiber Front Lip - Tesla Model Y - SOLD OUT (preorders beingtaken new for 9/22 shipment)
ADRO - Carbon Fiber Trunk Spoiler - Tesla Model Y - SOLD OUT (preorders beingtaken new for 9/22 shipment)
ADRO - Carbon Fiber Rear Diffuser - Tesla Model Y - 3 remaining
ADRO - Carbon Fiber Side Skirts - Tesla Model Y - 3 sets remaining
Ohlins - Road & Track DFV Coilover System - In Stock!
Just got the notification from Ohlins, our stocking order is on the way and should be arriving next week. Contact me to reserve a set! Kits are available for shipping or installation in our facility in Anaheim, CA.
europeanautosource.com
Meet the revolutionary new Road & Track suspension for Tesla models. Backed by over 45 years of experience in advanced suspension development and global racing series, the Road & Track line showcases Öhlins’ ability to engineer the ultimate suspension system for driving enthusiasts.
The Road & Track suspension for Tesla models is specially tuned for battery electric vehicle (BEV) applications and underpinned by cutting-edge Öhlins suspension technology. Öhlins’ patented Dual Flow Valve (DFV) technology transforms chassis control while sustaining a refined ride quality unsurpassed in the OE or aftermarket. Experience racecar-like handling without sacrificing comfort and safety, whether you’re driving to the office or crushing lap times on the track.
Ride height and damping control are adjustable to help you achieve the exact look and feedback you desire. Dampers can be individually adjusted through a wide range of adjustment options, with more than 20 defined clicks. Systems feature a monotube damper structure designed for heightened response, with strengthened inverted struts and aluminum body shocks that are lightweight and aid in cooling.
With the Öhlins Road & Track suspension for Tesla, you can expect a superior ride quality and elevated comfort over a variety of conditions and uses. The combination of premium features and options to fine-tune your performance result in the ultimate suspension package for daily drivers and weekend warriors alike.
The Features of DFV Technology
So what is DFV? It is Dual Flow Valve technology – and it sets us apart from our competitors. Only Ohlins has DFV technology on its road and track products.
With DFV, the dual flow valve gives the same characteristics on rebound as it does on compression, thanks to the damper fluid having a consistent path of flow in both directions. This means that the wheel and tyre can quickly and effectively resume their important position back on the ground, providing grip and traction. The new Öhlins R&T range uses DFV technology on every single fitment, making it the perfect upgrade for the enthusiast that needs comfort and agility in the one unit.
Features
- DFV (Dual Flow Valve)
- Adjustable ride-height
- Fully rebuildable
- Corrosion salt spray tested (ISO 9227)
- Includes hardware and installation instructions
- 2 year Limited Warranty
Front
- Conventional Shock Absorber
- Single bleed adjuster
- Spring preload adjuster
- Height Adjustable (approx. -5mm to -30mm lower than standard)
- Coil Springs (rate 110N/mm)
- Uses original top mounts
Rear
- Conventional Shock Absorber
- Single bleed adjuster
- Separate spring preload adjuster
- Height Adjustable (approx. -5mm to -30mm lower than standard)
- Coil Springs (rate 120N/mm)
- Uses original top mounts
Models Supported
Tesla Model 3 (2017+) RWD and AWD
Tesla Model Y (2020+)
Just got the notification from Ohlins, our stocking order is on the way and should be arriving next week. Contact me to reserve a set! Kits are available for shipping or installation in our facility in Anaheim, CA.
Ohlins - Road & Track DFV Coilover System - Tesla
Meet the revolutionary new Road & Track suspension for Tesla models. Backed by over 45 years of experience in advanced suspension development and global racing series, the Road & Track line showcases Öhlins’ ability to engineer the ultimate suspension system for driving enthusiasts.
europeanautosource.com
Meet the revolutionary new Road & Track suspension for Tesla models. Backed by over 45 years of experience in advanced suspension development and global racing series, the Road & Track line showcases Öhlins’ ability to engineer the ultimate suspension system for driving enthusiasts.
The Road & Track suspension for Tesla models is specially tuned for battery electric vehicle (BEV) applications and underpinned by cutting-edge Öhlins suspension technology. Öhlins’ patented Dual Flow Valve (DFV) technology transforms chassis control while sustaining a refined ride quality unsurpassed in the OE or aftermarket. Experience racecar-like handling without sacrificing comfort and safety, whether you’re driving to the office or crushing lap times on the track.
Ride height and damping control are adjustable to help you achieve the exact look and feedback you desire. Dampers can be individually adjusted through a wide range of adjustment options, with more than 20 defined clicks. Systems feature a monotube damper structure designed for heightened response, with strengthened inverted struts and aluminum body shocks that are lightweight and aid in cooling.
With the Öhlins Road & Track suspension for Tesla, you can expect a superior ride quality and elevated comfort over a variety of conditions and uses. The combination of premium features and options to fine-tune your performance result in the ultimate suspension package for daily drivers and weekend warriors alike.
The Features of DFV Technology
So what is DFV? It is Dual Flow Valve technology – and it sets us apart from our competitors. Only Ohlins has DFV technology on its road and track products.
With DFV, the dual flow valve gives the same characteristics on rebound as it does on compression, thanks to the damper fluid having a consistent path of flow in both directions. This means that the wheel and tyre can quickly and effectively resume their important position back on the ground, providing grip and traction. The new Öhlins R&T range uses DFV technology on every single fitment, making it the perfect upgrade for the enthusiast that needs comfort and agility in the one unit.
Features
- DFV (Dual Flow Valve)
- Adjustable ride-height
- Fully rebuildable
- Corrosion salt spray tested (ISO 9227)
- Includes hardware and installation instructions
- 2 year Limited Warranty
Front
- Conventional Shock Absorber
- Single bleed adjuster
- Spring preload adjuster
- Height Adjustable (approx. -5mm to -30mm lower than standard)
- Coil Springs (rate 110N/mm)
- Uses original top mounts
Rear
- Conventional Shock Absorber
- Single bleed adjuster
- Separate spring preload adjuster
- Height Adjustable (approx. -5mm to -30mm lower than standard)
- Coil Springs (rate 120N/mm)
- Uses original top mounts
Models Supported
Tesla Model 3 (2017+) RWD and AWD
Tesla Model Y (2020+)
Classic combo. MYP Gets 19" Mag Blue TE37s, KW V3 coilovers and Project Kics R40s hardware.
Which spoiler is on this one?Another set of Eibach springs install for this MYP, check out that metallic flake!
First Ohlins R&T set installed today, along with a set of Redwood rear camber arms on this MYP.
Overall lowering is about 20mm here (19" wheels installed), went for a quick test drive and the ride is absolutely fantastic, as expected from Ohlins. Car feels tight, nimble and really soaks up the bumps in the pavement while giving a smooth & comfortable ride.
Enjoy the pics.
Overall lowering is about 20mm here (19" wheels installed), went for a quick test drive and the ride is absolutely fantastic, as expected from Ohlins. Car feels tight, nimble and really soaks up the bumps in the pavement while giving a smooth & comfortable ride.
Enjoy the pics.
Similar threads
