Vorsteiner is a globally recognized luxury manufacturer for carbon fiber body kits, wheels, exhaust & accessories for High end Performance vehicles such as: BMW, Porsche, Mercedes Benz, Audi, Ferrari, Lamborghini, Bentley, Mclaren, Ranger Rover, Rolls Royce, Jaguar, Aston Martin, Tesla and more.
Vorsteiner's carbon fiber parts are produced using a state-of-the-art aerospace autoclave system. This provides unsurpassed rigidity, strength and finish to our aerodynamic components. We distinguish ourselves by utilizing a resin pre-impregnated, vacuum-formed carbon fiber material that results in a 20% - 30% stiffer and stronger product than an equivalent wet-lay up product.
This technique drastically reduces rejection rates, significantly improving delivery times. Vorsteiner uses a combination of unidirectional, 1x1, and 2x2 weave carbon fiber to keep the weight to a minimum while providing optimum strength and rigidity. The vacuum-formed technology used in our aerodynamic parts draw out excess resin which ultimately draws out excess weight without decreasing structural rigidity. This process provides a much tighter control over the fit and finish giving you the piece of mind that the part will perfectly match the factory shut lines and contours.
With the well received Vorsteiner Volta Carbon Fiber Program for the Model 3, the Model Y was just around the corner. Parts are being released April 1st, and pre-orders are being taken now. Act now to be one of the first to receive a kit as these are planned to sell quickly.
Renderings (actual pics to be released 4/1)
Vorsteiner's carbon fiber parts are produced using a state-of-the-art aerospace autoclave system. This provides unsurpassed rigidity, strength and finish to our aerodynamic components. We distinguish ourselves by utilizing a resin pre-impregnated, vacuum-formed carbon fiber material that results in a 20% - 30% stiffer and stronger product than an equivalent wet-lay up product.
This technique drastically reduces rejection rates, significantly improving delivery times. Vorsteiner uses a combination of unidirectional, 1x1, and 2x2 weave carbon fiber to keep the weight to a minimum while providing optimum strength and rigidity. The vacuum-formed technology used in our aerodynamic parts draw out excess resin which ultimately draws out excess weight without decreasing structural rigidity. This process provides a much tighter control over the fit and finish giving you the piece of mind that the part will perfectly match the factory shut lines and contours.
With the well received Vorsteiner Volta Carbon Fiber Program for the Model 3, the Model Y was just around the corner. Parts are being released April 1st, and pre-orders are being taken now. Act now to be one of the first to receive a kit as these are planned to sell quickly.
| TESLA MODEL Y VRS PROGRAM | Part Number | MSRP |
| Vorsteiner - VRS Carbon Fiber Aero Front Spoiler - Tesla Model Y | TEV2020 | $1995 |
| Vorsteiner - VRS Carbon Fiber Aero Add-On Bumper Flares - Tesla Model Y | TEV2010 | $795 |
| Vorsteiner - VRS Carbon Fiber Aero Fender Vents - Tesla Model Y | TEV2090 | $795 |
| Vorsteiner - VRS Carbon Fiber Aero Side Skirts - Tesla Model Y | TEV2030 | $2495 |
| Vorsteiner - VRS Carbon Fiber Aero Rear Diffuser - Tesla Model Y | TEV2050 | $2295 |
| Vorsteiner - VRS Carbon Fiber Aero Decklid Spoiler - Tesla Model Y | TEV2060 | $1495 |
| Vorsteiner - VRS Carbon Fiber Aero Vented Frunk - Tesla Model Y | TBA | TBA |
| Vorsteiner V-FF 105 Flow Forged Wheels - 20x10.5 (square) | ||
| Vorsteiner V-FF 107 Flow Forged Wheels - 20x9.5, 20x10.5 (staggered) | ||
| Vorsteiner V-FF 109 Flow Forged Wheels - 21x9.5, 21x10.5 (staggered) |
Renderings (actual pics to be released 4/1)
Last edited:
