Electric window broken - sourcing parts

[ML Auto]

Here are some pics. There are only two bolts holding the switch assembly on, the hard part is getting to them. The thin stainless bracket gets bent down and prevents the microswitch from resetting. The one shown is bent down, continually depressing the switch. There is a little adjustment, but no stop. So every time you push on the button, you bend the bracket to activate it. Eventually it stays bent. Not a very good design.

 

[delavandaag]

Many thanks, ML Auto! This is very helpful.

 

[X.l.r.8]

With the window out the way it’s much easier. Ended up removing the white plug and putting an ohm meter on the 2 pins, found out instantly it worked, so it was the door latch mechanism. Luckily it’s only $160 Canadian for the latch and super easy to remove

 

[delavandaag]

X.l.r.8, where did you order the latch and which part number is it?, Thnx, Delavandaag​

 

[Stefan T]

It "easy" to fix screw out the button from the door and bend the spring

But they have forgot that is a crash beam in the door

Took me 3h to do
Tips is cut in the look before resembling

 

[X.l.r.8]

Lol, that’s why I took the window out, gave me a lot more room. The door bar is a pain to work around in a hurry.

 

[X.l.r.8]

X.l.r.8, where did you order the latch and which part number is it?, Thnx, Delavandaag​

Will do waiting in a phone call to pick up the part, I’ll post the invoice