EO Basic - Changing cable

[GraemeS]

Hi all

I've had to change where my X is parked and now my tethered cable doesn't reach! I've ordered one of the EVChargeKing type 2 cables. Had a look at opening the unit to change the cable when it arrives but can't get 2 of the screws open. The top and bottom are Torx but the middle ones are something else. Anyone done this?

 

[Roy W.]

Those middle screws look like a security Torx head. The tip of the screwdriver or bit has a hole in it for the centre pin.

Screwfix has a set of bits here that may be suitable. You’d have to check that it has the correct size.

https://www.screwfix.com/p/hex-shank-mixed-security-bit-set-33-pieces/2840v

 

[NewbieT]

If it’s not security torx, could be a ‘spline’ head screw.

 

[GraemeS]

Good thoughts, same as mine! It's not a security Torx, that was what was holding the unit to the wall so bought the set and presumed it would fit but no. Could be spline but can't find any security spline bits.
The more I look at the pic I'm wondering if it's a security nut, not a screw/bolt??

 

[Mr H]

6pc 1/2" Drive Spline Tamper Proof Security Bit - M10, M12, M14, M16, M18 & M20 | eBay

 

[GraemeS]

6pc 1/2" Drive Spline Tamper Proof Security Bit - M10, M12, M14, M16, M18 & M20 | eBay

Getting closer! Looks like it might fit but no way I'll get a 1/2" socket down that hole!

 

[Mr H]

Getting closer! Looks like it might fit but no way I'll get a 1/2" socket down that hole!

there's loads about, take your pick

US PRO Tools 58pc Hex Allen Spline Torx and Security Star Bit Set NEW 1362 5060478382409 | eBay

 

[Russinating]

Even if you get it open is changing the cable even going to be possible?

 

[Mr H]

Could use a high quality external junction box. It would be quite easy to find the pin out using a simple diagram and a multimeter (before cutting the cable). Even if the colour codes match i would still use a meter, just in case.