Separate names with a comma.
Discussion in 'Model 3: Interior & Exterior' started by neptune2000, Dec 12, 2017.
Thanks for confirming this. I ordered the extra long yesterday as I was too impatient to wait for someone to measure. I chose the size after watching Evannex's installation video for The Law. It looked to me to be at least 3 inches and the mount could extend a bit into the intake vent if need be.
THERE ARE EXCEPTIONS TO FRONT PLATE!
NO FRONT LICENSE IN SOUTH DAKOTA IF..................
I asked at the DOT and IF I was willing to pay an extra $25 and if i promised to only drive 6000 miles I get a special "REAR ONLY" license plate.I'm guessing it's an agriculture state deal.
SO ASK OR GOOGLE YOUR OWN STATE!!
Measuring the grill & designing something around it certainly had its challenges. It's not really "flat" on the edge.
This might have already been asked but there is no interference with the louver operation, right?
Also, can you provide a pic of a complete side angle? I'm trying to see how much clearance there is between the plate frame and the bumper. Reason for my concern is if something strikes the plate, will the plate frame damage the bumper from impact. Snow, road debris, etc.
There's no interference with the internal louver operation. I'm actually working on an installation video coming soon, thanks
Do you have a pic at the ready of the side profile? Just want to know if this will work for me.
I have more pictures on the product page: The Bandit License Plate Holder | 22.214.171.124 Creations
Would like to take a moment to thank those in this thread that inspired me to turn this DIY project into a product. If any of you are still interested, I have a limited usage $20 discount coupon code: tmc20
Thanks to all, God bless & keep the Tesla's coming!
None of those images provide the angle I'm requesting.
I'm looking for a straight across shot from the side of the mount so you can see the distance between it and the bumper.
I will obtain an updated photo, thanks.
Thx for designing this front licence bracket.
Love supporting "the little guy"
I think I will receive The Bandit" before I get my Blue 3
@Blu Angel, thanks, yes I'm just "a little guy" startup! Very appreciated! How much longer is your wait?
New 2nd option Front Bracket by Evannex, costs $89
For all of your reference.
I think this 2nd option isn't much different than the stock OEM mount?
I thought the stock mount used the tape to adhere to the nose of the car. This looks like it uses the tape to adhere to the air dam.
Hope that adhesive is strong .
Yes, and it sits much lower staying out of the way of the nose.
Tony, I just ordered your frame. When are you going to have the instructions video up?
@Super Gizmo, thank you for your support! Video should be up next week. Installation should be very simple about 10 minutes. The entire bracket is already assembled, ready to go.