Question for long-time users of FSD Beta (which I just received over the weekend).....I noticed a change on my morning commute while on the interstate (so theoretically the AP/NoA stack). Before installing beta, anytime I was on the interstate on AP/NoA, my speed wouldn't generally change as I would pass through areas with changes in the speed limit. It would show the updated/correct speed limit on the display, but not update my travel speed. I typically had my offset set to 10+, and the only time my car would slow down would be as I went through a construction area (which actually has a new route/lane), or as I went through an interchange from one interstate to another.
However, on my first commute with Beta, it would actually drop my speed on the interstate for each change in the speed limit....something it didn't do for the last 6 months I have owned the car. Curious if that meant my AP/NoA just wasn't working correctly, or if this was a change with Beta.
and lastly, I really wish they made the speed offset selection separate for AP/NoA and FSD. In other words, it would be nice to drive the speed limit on FSD, but have an offset of 10mph while on NoA/AP (which is still slow compared to most cars driving in Atlanta). On my first FSD beta drive, I activated it in my gated neighborhood.....which it thought my speed limit was 35 (or set the speed to 45 with my +10 offset), however, posted limit was 15. It gave me a good scare as it sped up so quickly towards the closed gate and showed zero signs of stopping.