Installing a New gen 3 charge point uk help?

[8enj]

Hi all im after some advice if anyone can help it would be greatly appreciated.

I plan on running a 6mm cable to a 32amp outlet on my hager board i have a spare zone (see picture circled in red)

Is this sufficient as im reading i need a type b rcd? And also surge protection And possibly pen device?

It is being installed by a qualified electrician but i want to make sure its done correctly myself and future proofed.

TYIA. Ben

 

[orntar]

Might get more response in the uk forums.

 

[jjrandorin]

Might get more response in the uk forums.

OP, here is the link to those forums here on TMC in case you have difficulty finding them:

The UK and Ireland

teslamotorsclub.com

 

[8enj]

Thank you both i have posted via the uk link

 

[WarekiwiT]

If you want to be fully UK legal then you also need a "PEN fault detector"- a uniquely UK requirement to protect against Neutral/Earth faults in the street underground wiring. There are numerous youTube videos about this. It adds about another £150 . Tesla don't include it in their Gen3 units as only the UK currently require it.