Any reason behind the decision?
Too bad. I worked with them to tune their amp to work in my MCU2 Model S and it works great. I am surprised they made this decision.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Any reason behind the decision?
Too bad. I worked with them to tune their amp to work in my MCU2 Model S and it works great. I am surprised they made this decision.
i've read reports about popping noises on MCU2. Is that what you helped tune or fix?
did you reboot?Got my hands on the Amp for my 2015
I replaced the fuse F18 with the 35amp supplied
Unplugged the stock amp and plugged in the LH Amp
Sounds coming out the speaker but nothing out the sub
Any ideas?
I always though this would be a good idea, but is beyond my skill/time level. The actual part for the connector is a TE 1534046-1. There are sites that will make a bunch of the. Early cars without UHFS still had the amp connector so you could wire a sub off that using the above part.There was some discussion a while back about someone possibly creating a wiring harness interface that would plug into the premium amp harness. That would be very useful if trying to integrate with a different class D, 5 channel amp without splicing into the existing wires. Has anyone heard anything more about this? I created the attached diagram when I was working on my stereo project and it could be useful for helping to create a connector.
did you reboot?
I always though this would be a good idea, but is beyond my skill/time level. The actual part for the connector is a TE 1534046-1. There are sites that will make a bunch of the. Early cars without UHFS still had the amp connector so you could wire a sub off that using the above part.
And my LH amp just called it quits. Waiting to hear back from them on fix or replacement. Fingers crossed.
Do you know if they’re planning to sell new units separately? Can’t see them on their website.Just got my updated replacement amp. Took a while as they reworked the board to fix the issues it had and revised it to work with the newer MCU's. Definitely has more venting than the previous unit did.
View attachment 638113 View attachment 638115
Do you know if they’re planning to sell new units separately? Can’t see them on their website.
Meaning, the sound what usually goes in yer ears...Polk Audio drivers is the only way to go, if you are concerned about -natural- sound.
Just got my updated replacement amp. Took a while as they reworked the board to fix the issues it had and revised it to work with the newer MCU's. Definitely has more venting than the previous unit did.
View attachment 638113 View attachment 638115