Lighted Tesla T Pre-order List

[artsci]

If you think you want to buy the lighted Tesla T kit when it's available in mid-December please add your name to the pre-order list below. An extensive discussion and more information is available in the current thread about the project. The kit will include the lighted T and arch, assembled and waterproofed along with detailed installation instructions.


Cost

The cost of the kit is now estimated at $180 - $190. 50 kits will be available from the first production run. When the list reaches 75 a second production run will be launched. The kit will include the lighted T and arch, assembled and waterproofed along with detailed installation instructions.

[Admin note: Following post is a wiki which you can edit]

 

[artsci]

Orders can now be placed here:


Pre-order waiting list:

1. nkohlimd
2. npiwovar
3. rogbmw
4. suprkar
5. The Fury
6. zax123
7. brianman
8. xhawk101
9. ccbldg
10. jamtek
11. jason
12. walla2
13. bad luck
14. shumdit
15. KlausFechner
16. yobigd20
17. Jetson
18. 1051
19. ArthurHansen
20. islandbayy
21. Soarteeth
22. tomanik
23. umuhk
24. efusco
25. 4super9
26. dsmith2189
27. Logan
28. rekoh
29. professionalr
30. KineticFlow
31. ModelS1079
32. Chas F
33. phx182flyer
34. gwagen27
35. pwrmeup
36. scriptacus
37. Odenator
38. SamGarber
39. RLA12194
40. WeazL
41. jpasqua
42. NJ Plugin
43. SteveW25561
44. TSLAopt
45. pudljmpr
46. Cards2011
47. bhuwan
48. drtko147
49. ggbjr
50. mknox
51. inottawa
52. joefee
53. NoMoGas
54. deinspanjer
55. randyy
56. SouthJerseyJon
57. Malnodnarb
58. Surfrcali
59. ​Jayfrost
60. ​Btrflyl8e
61. AlMc
62. gnelson
63. Najeeb
64. RandyS
65. mpbruin108
66. ​dratifk
67. smartypnz
68. ​Musterion
69. ​pgiralt
70. Denarius
71. Iconoclast
72. Ben W
73. Tezco
74. dpodoll*
75. Jhall118
76. muleferg
77. mahedy
78. Warrenbonz
79. Norway
80. LastNLSig
81. cgiGuy
82. dpodoll
83. blokhus
84. paltschuler
85. Solarguy01
86. demetri
87. miamimd
88. Patrick
89. ABVA
90. Id2020 (post 53)
91. Jau24 (post 54)
92. Jmarlene (post 55)
93. Honolulu MS
94. Vger
95. mmedina (post 57)
96. A-E
97. mjw
98. SouthJerseyJon
99. alexhamilton7
100. tdchinn
101. cadester
102. alexhamilton71
103. Asif
104. nomoregas
105. tnguyen1221
106. pollux
107. mpbruin108
108. passion4audio
109. Ato J. Boldon
110. MyDreamCar
111. bluetinc
112. SteveWest
113. diaretical
114. bradhs
115. jerry33
116. msolomi
117. andrewket

 

[artsci]

Recommended remotes:

Oznium 12V LED Dimmer and Strobe Remote Switch
Oznium Remote Control On/Off Switch

The Oznium remotes synch with Homelink very easily making off-on control of the T from the touchscreen quite simple. Oracle remotes, even though they sync with Homelink, are not recommended, as in my experience have an unacceptably high failure rate.

Installation

Installation is an easy DYI project or can be done by a auto accessory shop. It requires removal of the nose cone, drilling of two 5/64 holes in the nose cone under the T and arch mounting position, connecting the T to 12v and ground with a buyer-supplied device that will provide remote control.

Other parts required include remote control, tap-a-fuse, 18 gauge wire, Goop or 3m double faced auto tape.

Tools require include a power drill, 5/64 drill bit, plastic lever for prying the nose cone loose.

Photos and video of beta

 

[Klaus]

Sorry, my entry takes up 2 slots, apparently due to auto-wrap. I don't need two

 

[artsci]

Sorry, my entry takes up 2 slots, apparently due to auto-wrap. I don't need two

Got it.

 

[4SUPER9]

Please add me too

 

[efusco]

Absolutely!

 

[KineticFlow]

add me as well

 

[ModelS1079]

Bravo! Looks great
List me please. Thanks.

 

[PWRMEUP]

Looks awesome!
Please add me.

 

[gwagen27]

I just added myself to your list. Thanks in advance!

 

[TSLAopt]

I just added myself to your list. Thanks in advance!

Add me too please!

 

[pudljmpr]

Add me as well

 

[Cards2011]

Please add me!

 

[SteveW25561]

Added my name too!

Btw, does the Oznium remote you suggest remember its power on/off status when the 12v is restored? In other words, I'd like to hook the circuit up to a 12v source that is switched (accessory feed) and use the Oznium remote to set the brightness level, but then have the whole thing turn on or off according to the car's accessory on ("ignition") status? If I understand correctly the Oznium system remembers its own brightness or strobe settings when you turn it on or off, but the Oznium itself needs to be turned on or off using the remote. Will the Oznium turn on and off using just the 12v accessory on/off status, without me remembering to use the remote every time?

Alternatively is there a way to just set the LED brightness and have the T simply switch on and off with the 12v accessory circuit?

Thanks for this cool mod!

 

[bhuwan]

Me as well - hasn't we emailed you a few weeks ago too?

 

[drtko147]

Add my name to the list.

 

[ggbjr]

Me too!

 

[gwagen27]

Add me too please!

TSLAopt, pudljmpr, Cards2011, bhuwan, drtko147, ggbjr...I added you guys to the list. Artsci, hope that is ok.

 

[blokhus]

Please add me as well.