M3P Need Spacer Help

[jmaddr]

I could have sworn that read somewhere that one of them should be torqued less, but for the life of me, I can't find it.

Your spacer vendor would be the definitive answer, but I torque both the same (Blox aluminum). I do think I'm crushing the crap out of the Blox at 130 but I only did it once as they don't come off after that.

 

[RedPM318]

I went with 25 in the rear and 20 in front. Doesn't rub in either area at stock ride height but if lowered in front to within an inch of tire, it might rub a little on big bumps or if turning onto a driveway at a considerable speed.

 

[Trackjack]

Most of the spacer manufacturers have recommended 100 ft-lbs for torquing their larger/thicker (15/20/25mm)spacers.