Aftermarket Wheels on Model 3

[T3SLAROD]

What lug nuts are most using?

 

[ElectricGhost]

Here's my 2019 AWD, lowered 1 inch with 19X9.5 +35 offset Enkei TFR wheels and 265/35/19 Continental all around. I shaved about 14 pounds going from the 18 inch aero wheels while going up in size.

I'm not finding those in 19's. Do you have a link to where yo bought them? I want to take a look.

 

[Voltron_M3]

I'm planning to buy this set.
GTC02 | Enkei Wheels

Think the bolt hole size will work?

I believe all Enkei's will accommodate M14 studs. My old wheels, Enkei TS10, fit without having to bore out the holes.

 

[IGW1]

I'm not finding those in 19's. Do you have a link to where yo bought them? I want to take a look.

https://www.amazon.com/dp/B07D1BY5C9/ref=cm_sw_r_cp_apa_i_26e6Eb6J7C8FG

 

[Gasaraki]

GTC02 | Enkei Wheels

For people who wants to know the weight of that wheel, the 19x9 wheel is 22lbs or 10kg. If people want to know the weight of some other sizes, let me know.

 

[anti]

...

The only thing is that some people mentioned that Japanese wheels use a 12mm bolt hole instead of the 14mm that Teslas uses? No one lists bolt hole sizes.

Not entirely true. Many Advan models are 14mm (varies by model) and many are listed on their website http://www.yokohamawheel.jp/

 

[P-Lo801]

Anyone have any recommendations for lightweight lug nuts? The only ones I know of are the super expensive ones from Unplugged, and i've read about Ray's. However, both of these are tapered, whereas I need conical type.

 

[Burrito]

i have a set of iconix that are very nice, i can take the weight of them if you want since they are off my car at the moment..... also for sale
WRI14KA | Kics R40 Iconix M14 Black Lug Nuts 14x1.5

 

[P-Lo801]

i have a set of iconix that are very nice, i can take the weight of them if you want since they are off my car at the moment..... also for sale
WRI14KA | Kics R40 Iconix M14 Black Lug Nuts 14x1.5

Thanks. According to the site you linked to, the whole set weighs under 2lbs. Can you measure the length of them too please?

 

[Burrito]

Thanks. According to the site you linked to, the whole set weighs under 2lbs. Can you measure the length of them too please?

 

[shylude]

Anyone running Advan RGIIIs besides MPP? How do these hold up on the street? 18 lbs for 18x9's seems stupid low. Although Titan-7's are forged for a little less and only 2 lbs more. Trying to decide between the two for a daily communitor, near never tracked.

Yokohama Advan Racing Wheels - RGIII UNIVERSAL - SOHi Performance - Your best source for genuine automotive parts!

I would be interested in which direction you would go in. The Advans MPP is ruining is 19x10.5 - I would assume you would go less wide say 9 or 9.5?

 

[srk67]

Saw a list of aftermarket wheels compatible with a P3D mentioned somewhere. Anyone have a google sheet they can link to?

 

[ShaneAR]

Saw a list of aftermarket wheels compatible with a P3D mentioned somewhere. Anyone have a google sheet they can link to?

 

[srk67]

Thanks so much! Do you happen to have the link too?

 

[srk67]

Nvmd, found it

Tesla Model 3 Performance 18" Wheels

 

[SignatureSales]

Best of the both world setup.
-Flush front and rear with no spacer
-OEM width to reuse OEM 235/35/20 tire
-Deep concave
-Minimal range impact

Signature SV104
20x8.5 ET20/15
Gloss Black with Diamond cut face

 

[ShaneAR]

Nvmd, found it

Tesla Model 3 Performance 18" Wheels

Good find. Didn't have the link, just an older screenshot. I've looked that list over, more than a few times lol

 

[EVS Motors]

Thoughts on these new wheels on our 3? ADV.1 just released their FlowSpec line, so here’s a quick unboxing of the wheels and how it looks on the car. Impressed with the weight and price point considering how intricate the design is.

 

[pdx_m3s]

Best of the both world setup.
-Flush front and rear with no spacer
-OEM width to reuse OEM 235/35/20 tire
-Deep concave
-Minimal range impact

Signature SV104
20x8.5 ET20/15
Gloss Black with Diamond cut face

View attachment 553685 View attachment 553686

Beautiful. Well done.

 

[ElectricGhost]

I would be interested in which direction you would go in. The Advans MPP is ruining is 19x10.5 - I would assume you would go less wide say 9 or 9.5?

Yes, 9 or 9.5's for me.