Hello Folks,
I have been curious what happens with Drag Strip Mode from a technical perspective. I took some thermal pics of my Plaid. I finished charging the previous night and left the car plugged in. Then I unplugged and turn on Drag Strip mode and took before and after thermal pics of the front engine bay heat exchangers.
The FLIR camera that I used indicates 3 temperatures, red dot - hot, blue dot - blue, hollow dot - temperature at spot. The color scaling is a bit off so it is much more accurate to look at the exact temperature.
I want to get to the heat exchanger right beside the front drive unit but I don' t know who is holding the front plastic tub in (I know there are 2 X 10 mm bolts) but I don't know how else it is fastened in......
I have been curious what happens with Drag Strip Mode from a technical perspective. I took some thermal pics of my Plaid. I finished charging the previous night and left the car plugged in. Then I unplugged and turn on Drag Strip mode and took before and after thermal pics of the front engine bay heat exchangers.
The FLIR camera that I used indicates 3 temperatures, red dot - hot, blue dot - blue, hollow dot - temperature at spot. The color scaling is a bit off so it is much more accurate to look at the exact temperature.
I want to get to the heat exchanger right beside the front drive unit but I don' t know who is holding the front plastic tub in (I know there are 2 X 10 mm bolts) but I don't know how else it is fastened in......
Attachments
-
11 Minutes to Drag Strip.JPEG340.3 KB · Views: 88
-
20210916T084702.jpg1.6 MB · Views: 37
-
Drag Strip Ready.JPEG336.8 KB · Views: 35
-
Front Drag Strip Ready.jpg1.4 MB · Views: 46
-
Front.JPEG518.1 KB · Views: 35
-
IMG_7559.JPEG429 KB · Views: 35
-
IMG_7561.JPEG350.1 KB · Views: 34
-
Morning - Plugged In Front.JPEG428.7 KB · Views: 37
-
Morning - Plugged In Rear.jpg1.5 MB · Views: 35
-
Morning - Plugged in.jpg1.4 MB · Views: 33