Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Need 2016 - 2018 Model S, X front seat airbag connector

rk2020

Member
Jan 24, 2021
11
0
Melbourne, Florida
I want to swap some gen1 seats in to my Model S to replace the Next Gen seats. I need the airbag electrical connector that connects to the car's wiring harness under the seat. Tesla changed the airbag connector on the Next Gen seats, so I need to get the later airbag connector to splice on the the gen 1 seats. I need 2 connectors, one for each seat. The airbag connector is not part of the seat's wiring harness, it just goes directly to the airbag. So if you have a seat with a blown airbag, you could sell the connector without hurting the seat's wiring harness. The connector is the black one in the photo or the yellow one, both the same. They have 4 wires attached - need about 6 inches of the wire to splice to. It's not the smaller yellow connector from 2015 and earlier seats that has a white grommet attached to it.
Airbag connector.jpg
Yellow.jpg
 

Bwitzel

Member
Jul 10, 2020
6
0
78757
Yes I do. I'm attempting to do the same retrofit as RK2020. I found some 2018 next-gen seats that will be shipped to me this weekend. I have a 2013 model s 85. Why have you done the retrofit also? Or have those harnesses?
 

About Us

Formed in 2006, Tesla Motors Club (TMC) was the first independent online Tesla community. Today it remains the largest and most dynamic community of Tesla enthusiasts. Learn more.

Do you value your experience at TMC? Consider becoming a Supporting Member of Tesla Motors Club. As a thank you for your contribution, you'll get nearly no ads in the Community and Groups sections. Additional perks are available depending on the level of contribution. Please visit the Account Upgrades page for more details.


SUPPORT TMC
Top