Need help for 5mm spacers that fit Model Y LR with 20” Uberturbine wheels.

[Sidkneeeeee]

So I just mounted tires 255/45/20 on 20” M3P on to my new Model Y 2022 LR. I’m looking for 3mm or 5mm spacers that fit on the Y LR.

I had the 5mm hubcentric spacers that fit my M3P but they don't fit the LR. It feels loose and dangles on the studs, not tight fighting.

I see some on Amazon but can’t seem to find the perfect one just for Y LR

 

[Casss]

Sorry not to be of any use on the question about spacers, but have a question about your setup...

Have you had any issues with increasing the total wheel diameter by an inch over standard?

 

[Sidkneeeeee]

Sorry not to be of any use on the question about spacers, but have a question about your setup...

Have you had any issues with increasing the total wheel diameter by an inch over standard?

No issues but I only driven it 20miles since install . Some reviews say it’s a smoother ride compared to the usual size tires with 20” inductions, as I do feel it’s a pretty ride. But I have no experience with inductions.

 

[Casss]

It definitely is smoother because you've got more rubber to cushion the car. I don't think many people have gone for 255 / 45 / 20 though so it's interesting to see.

 

[nate704]

Using the spacers without lowering the car will look unnatural.

 

[Sidkneeeeee]

Using the spacers without lowering the car will look unnatural.

I tried and put 5mm hub centric spacer (performance) already and they look very flush (no poke) that why I’m doing it.

 

[SDM44]

Honda Accord or Acura TL spacers work. Same bolt pattern and same center bore size. You can find them on Amazon for $9

 

[dogmodes]

Sorry not to be of any use on the question about spacers, but have a question about your setup...

Have you had any issues with increasing the total wheel diameter by an inch over standard?

I’ve got about 6000 miles on 255/45/20s. Haven’t had any rubbing issues or anything. However I have had a bit of instability at times, can’t say if it’s the tires (CrossClimate 2’s) or the increased dimensions. Once in awhile in a lane change or quick maneuver at high speeds it almost feels like the tire buckles a bit. That’s probably not what is happening but what it feels like, could even be a combination with the road. I’m just probably not going to keep these on for the summer and just use them as winter tires. I mentioned if before and another person with the exact same setup had the exact same problem.

Found it, really think it‘s the CC2s but just FYI.
Post in thread '255/45R20 Tires on the 20" Inductions?'
255/45R20 Tires on the 20" Inductions?

 

[jacksterCali]

5mm spacer
doesn’t it require longer stud ?

 

[bfabian76]

5mm spacer
doesn’t it require longer stud ?

No it doesn’t