Track Series SV503 • Brushed Bronze Tinted • Efficiency/ flush setup 19x8.5 • Extra tire protection against curb • OEM lug nuts and TPMS Compatible
Problem: OEM wheel in 9.5J pair with 255 width tire becomes a curb rash magnet. It adds stress on the driver when the car is near the curb, and the wheel is sunk-in that could be hard pin point the distance between wheel and curb. Solution: With 8.5J setup paired with 255 width tire, it reduced the chance of curb rash, which means less stress while driving. Additionally, the flush fitment pushed the wheel flush to the fender to provides a clear view of the distance between the wheel and curb. ( and aesthetic look as a bonus) Track Series SV503 @xtnvieira • Matte Black • Efficiency/ flush setup 19x8.5 • Maximum tire protection against curb • OEM lug nuts and TPMS Compatible
2020 Black Friday sale is about to come to the end. We’re lucky to have all of your support. #signaturefamily The sale ends on 11/30/2020 11:59PM PDT. Still got some time to get your order in. Keep the DM coming
Looking for someone to go in with me on a deal for some wheels. I already have a set of 20s from them and I want to get another set of 18s to track. If 2 people order at the same time and shipped to a single address (your address but Jamie will modify my shipment) there’s even further discount. I’ve already placed my “potential” order with Jamie.
Track Series SV502 • Brushed Black Triple Tinted • Efficiency setup 19x9 • 19.4lb each ( ~ 50% weight saving over 21” uberturbine = ~ 310lb static weight) • Extra tire protection against curb • OEM lug nuts and TPMS Compatible
Flush front and rear, maximum tire protection without sacrificing on range. It is the best of the both world setup. Reserve Series SV902 • Matte Bronze • 21x8.5 & 21x9.5 • Reuse OEM PUP tire • Maximum protection against curb • OEM lug nuts and TPMS Compatible @nlee1201
I'm interested in a set of SV503 to replace my Uberturbines. I think I want to do the 21x9 and 21x10 setup to get a little extra rim protection. Will I get any range / efficiency increase since they are much lighter or will that gain be negated by increased air drag?
Depends on how sticky your tires are too. I get slightly better mileage driving around town and slightly worse on highway because of additional air flow. I was told they are considering developing aero covers but I don’t know how long that would be or if it would actually happen.
Decided to use my Signature SV107 20x9 that I had on my Model 3 and put it on the Y as a winter setup. Got some bluetooth sensors from Tesla service and ordered some Michelin Pilot Alpin PA5 in 265/40/20. Used some Ti lugnuts and 2-tone center caps as well. The SV107 and MPA PA5 combo are 51.8 lbs. I was surprised that it literally took a couple of blocks for the Y to pick up the new sensors. My Model 3 takes 10-20 mins of driving to recognize a different set of sensors. Some pics of the 3 with Rose Gold 19x9.5 Signature SV801 and Michelin Pilot PA4 winter setup. Glad that I can swap wheels between my 2 vehicles.
https://www.signaturewheel.com/products Pricing is on the Signature wheel website. Just click on a wheel and prices will show up. Take note that the price is MRSP and if you message Jamie, he will give you a way better deal than MRSP and i to you can mention I sent you his way.
I'm glad you spotted that out. Yes our directional wheels are truly directional. Every detail has been thought out. If you're interested in your new set....please feel free to reach out and DM me for Tesla owner pricing. -Signature wheels are bespoke forged wheels custom tailored to your needs...down to the mm. -Efficiency / Aggressive setup is available. Flush / tucked / poke fitment. -All of our 32 finishes are standard and there are no hidden charges. -Insured and air freight directly to you...no waiting on other sets. -Build time: As early as 3 weeks but typically 4 weeks. Industry leading for lead times. -Lightweight and fully forged. -Nothing hidden...quality wheels with no excuses. https://www.signaturewheel.com/
Can't wait for my rims. What do you recommend for lug nuts? Do you know of any red ones that would match the multi-coat read?