Vendor Official Signature Wheel Gallery | Fitment Q&A Thread

[SignatureSales]

One of the reason why Signature exist

-Monoblock series SV104
-Matte Gunmetal
-20x9
-OEM center cap bore

Tire:
-Michelin Pilot Sport Cup 2 245/35/20

Mod list:

-MPP Model 3 Sports Coilovers AWD
-MPP Arastradero Model 3 Rear Camber Arms
-MPP Arastradero Model 3 Rear Toe Arms
-MPP Page Mill Stainless Steel Brake Lines
-MPP Page Mill P3D+ Front & Rear Rotors
-MPP Lightweight Lithium Battery Kit
-MPP C125 race dash
-MPP Corkscrew Model 3 Front Upper Control Arms

-UP Adjustable Sway Bars
-UP Street And Track Brake Pad Set
-UP Front Lip Spoiler

___________
-Do it once
-Do it right
-Do it Signature Wheel

 

[jaboki]

For the folks that have 19x9.5, or 20x9.5 with 35 offset on a Performance version:

• Is the wheel about 5mm inside of the fender? I'll be getting MPP rotors and I want it flush after I get them. I don't want any poke.

I'm about to order a set, and I wanted to see if I should get 19x9.5 +35 or 19x9 +35 to fit my needs.

Thanks.

 

[SD_Engnr]

For the folks that have 19x9.5, or 20x9.5 with 35 offset on a Performance version:

• Is the wheel about 5mm inside of the fender? I'll be getting MPP rotors and I want it flush after I get them. I don't want any poke.

I'm about to order a set, and I wanted to see if I should get 19x9.5 +35 or 19x9 +35 to fit my needs.

Thanks.

Are you on coilovers or springs? If you're not, there appears to be some poke on the 9.5"+35

If you're lowered, you'll be fine with the 9.5+35. You should be able to go down to a +32 before having any poke.

Here is a 9.5+34 (Signature SV103):

Here is a 9.5+35:

 

[SignatureSales]

For the folks that have 19x9.5, or 20x9.5 with 35 offset on a Performance version:

• Is the wheel about 5mm inside of the fender? I'll be getting MPP rotors and I want it flush after I get them. I don't want any poke.

I'm about to order a set, and I wanted to see if I should get 19x9.5 +35 or 19x9 +35 to fit my needs.

Thanks.

Here is the photo from one of the owner with 19x9.5 ET35 on stock heigh.

 

[jaboki]

Are you on coilovers or springs? If you're not, there appears to be some poke on the 9.5"+35

If you're lowered, you'll be fine with the 9.5+35. You should be able to go down to a +32 before having any poke.

Here is a 9.5+34 (Signature SV103):

View attachment 476167
Here is a 9.5+35:
View attachment 476168

This is super helpful. I'm actually not lowered, just on stock Performance height. I'm still trying to figure out when I'll do the drop. Until then, I don't want it to poke.

So based on +32 comment, that means I'll have 1mm poke with MPP rotors and coilovers? Or, 1m poke with MPP rotors and stock height?

 

[SD_Engnr]

This is super helpful. I'm actually not lowered, just on stock Performance height. I'm still trying to figure out when I'll do the drop. Until then, I don't want it to poke.

So based on +32 comment, that means I'll have 1mm poke with MPP rotors and coilovers? Or, 1m poke with MPP rotors and stock height?

With MPP rotors, and coilovers at +32, you will be on the edge of poke up front.
With MPP rotors, and coilovers at +34/5, you will should not see poke up front.

With MPP rotors, and stock height, +35 or less it will look like some poke.

Are you doing rotors all around? If not, then the front will definitely look more "poke-y".

Here is the photo from one of the owner with 19x9.5 ET35 on stock height.
View attachment 476217

The image/attachment doesn't seem to work.

 

[jaboki]

With MPP rotors, and coilovers at +32, you will be on the edge of poke up front.
With MPP rotors, and coilovers at +34/5, you will should not see poke up front.

With MPP rotors, and stock height, +35 or less it will look like some poke.

Are you doing rotors all around? If not, then the front will definitely look more "poke-y".

Yea, I'll want to do rotors all around.

I'm leaning towards going 19x9 +35 now, to give me 6mm extra space to avoid the pokey look on stock. What do you think? But now I wondering if 19x9 will even fit the car inside the wheel well.

 

[TANGO SUKKA]

how much do the sv104 20x9 wheels weigh each?

 

[SignatureSales]

how much do the sv104 20x9 wheels weigh each?

SV104 20x9 ET30 weight 20.1lb each

 

[jaboki]

SV104 20x9 ET30 weight 20.1lb each

View attachment 476282

Just curious: Does 19/20x9 +35 fit? Or is +30 the only option?

 

[SD_Engnr]

Just curious: Does 19/20x9 +35 fit? Or is +30 the only option?

It will fit. The offset of +30 is to have the flush look as seen in post #261 up above.

 

[Murattukaalai]

Anyone want to get thanksgiving plus group discount join FB messenger group link below. @SignatureWheel Jamie helping us. And we have enough orders for discount plus track series gets the max discount.

Messenger

 

[SD_Engnr]

Anyone want to get thanksgiving plus group discount join FB messenger group link below. @SignatureWheel Jamie helping us. And we have enough orders for discount plus track series gets the max discount.

Messenger

I don't see a max discount on the group. HmJust their normal discount price. Am I missing something?

 

[SignatureSales]

Track with Royal series

-Royal Series SV801
-F19x9
-Anti-Slip Knurling​

 

[SignatureSales]

Another set of SV801 fresh out of oven.

-Royal Series SV801
-Brushed Bronze Tinted
-F 20x8.5 R 20x10
-Wheel and Tire package from Zohr: Michelin PS4S 235/35/20 & 275/30/20

 

[Murattukaalai]

Clean clean clean

-SV107
-19x9 ET30
-19x9 ET21
-Brushed Bronze Tinted

View attachment 468510

Any side view of the flush on front and rear of this one? What tires is he running?

 

[SignatureSales]

Ho Ho Ho, Santa is here early with the new Precision Series SV707 + Two new finishes

Sahara Brushed Sand​

Alaskans Gold ​

 

[SignatureSales]

Any side view of the flush on front and rear of this one? What tires is he running?

I'll ask the owner to send me some more pics.

 

[N54TT]

Those sv801’s look nice!! The openings in the spokes must be a pain to clean though. I have an arsenal of detailing supplies lol...but I don’t think my smallest wheel woolie would even work.

 

[Xerious]

Another set of SV801 fresh out of oven.

-Royal Series SV801
-Brushed Bronze Tinted
-F 20x8.5 ET24 R 20x10 ET34
-Wheel and Tire package from Zohr: Michelin PS4S 235/35/20 & 275/30/20

View attachment 484059​

OMG! I can't wait!!! They look beautiful!