Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

This site may earn commission on affiliate links.
I know this topic about showing each one his Model 3 .. so I don`t have one yet but I m an admin on the Tesla Club Tunisia Facebook page so I will post some pictures of Model 3 spotted in Tunisia
this is the latest one spotted and it is Long Range and it is newly registered ( 229 is latest plate number )
1650847037087.png


Tesla model 3 Performance

1650847156685.png

1650847296150.png


Tesla Model 3

1650847491688.png

1650847535501.png

1650847579421.png

1650847714909.png


Model 3 Long Range
1650847782306.png


another one
1650847935347.png

1650847971655.png
 
Looking good!
Are those recommended height settings by MPP?
TBH I'm not 100% sure. The shop where I had them installed is very competent, and I've passed them the instructions. He did told me he eliminated the rake sometimes you get with the default settings. It is low though. Good thing with the adjustable coilovers is that if I find it too low I can always raise back up a little bit.
 
Thanks to Danny at Model Plus Studio for hooking me up with a perfect setup of Advan Racing R6’s in 20x9.5 et+28 on 245/35/20 Bridgestone Potenza Sport tires. I’ve tried over 10 sets of wheels on my 3 and this takes the cake. Makes everything else seem plain (except my 21” Sig SV305S setup that is a tie IMO).
 

Attachments

  • 6543E583-7F3E-49A9-A856-8EC68C063B11.jpeg
    6543E583-7F3E-49A9-A856-8EC68C063B11.jpeg
    848.7 KB · Views: 175
  • 49E312A3-B73A-4EE1-AE0D-4A4393E09479.jpeg
    49E312A3-B73A-4EE1-AE0D-4A4393E09479.jpeg
    701.2 KB · Views: 159
  • 555180C4-1758-4DC3-BBC4-9FC4D67F5CD2.jpeg
    555180C4-1758-4DC3-BBC4-9FC4D67F5CD2.jpeg
    664.2 KB · Views: 142
  • ABEE1A7E-3859-4094-BB9D-F8112690F6CE.jpeg
    ABEE1A7E-3859-4094-BB9D-F8112690F6CE.jpeg
    596.5 KB · Views: 147
  • C33FCFA0-7473-49E9-B77F-C5F33CD7DA39.jpeg
    C33FCFA0-7473-49E9-B77F-C5F33CD7DA39.jpeg
    925.8 KB · Views: 155
  • 1F7E6B4E-BDEF-4EAF-B626-8A240D3E71D4.jpeg
    1F7E6B4E-BDEF-4EAF-B626-8A240D3E71D4.jpeg
    1 MB · Views: 158
These are so nice what are they?
These are RF06RR from a small company called Superspeed in Canada. I've always loved the look of the Ray's Volk Racing TE37 but this is a daily driver and couldn't justify the insane $$$$$ for a car that will never be on the track, these were a good compromise. They are flow formed and have a weight with rubber of 45 lbs which is about 4 lbs lighter than the stock Aero set up. I would have loved to go with a 19" instead of 18" but I drive a lot of county roads and past experience has taught me that the extra inch of rubber makes a huge difference when protecting the wheels from pot holes that show up randomly, especially the spring. I had to use a concentric hub ring as they come with a centre bore of 73.1 mm, again not tracking it so don't really care. Here are the specs:

Part: RF0618085405114MBSize: 18x8.5Offset: +40PCD: 5x114.3Centre Bore: 73.1Colour: Matt Black


I had to swap out the lugs as well because no JDM style wheel is complete with out them. The ones I put on were:

MUTEKI HR50 OPEN END 14X1.50 BLACK / RED RING

Screenshot from 2022-04-28 08-32-36.png
 
  • Like
Reactions: Jono89