Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

[WiscoSid]

Because without them, they'll eat through your paint down to the metal.

Source for this? I have PPF under all 4 but I would still like to see what you're talking about.

 

[Rothgarr]

Source for this? I have PPF under all 4 but I would still like to see what you're talking about.

Pictures and discussions can be found here on the TMC forums -- look through the mud flap discussions. I do recall one person saying that it even damaged the PPF they had. Below are some pics from Google. Long story short, the best kind of flaps to get are the kind that sit inside the wheel well only (like Rally Armor flaps or similar)

 

[E.Potter]

Right now… car is in the air…painting calipers… rivets on wheels will have same color…

 

[Jono89]

View attachment 802416

Is it a wrap or PPF satin finish? How’s the cleaning part?

 

[msb175]

They look like tesla factory flaps

front does look like the OEM tesla ones. tesla doesn't make OEM rears

 

[cmmd11483]

My car after a good detail and ceramic coating after 18 months of ownership. I did a full decon, paint touch up, 3 stage compound and polish then a coat of carpro cquartz uk followed by cquartz sic. Carpro Dlux and sic on the wheels and calipers. I added the carbon fibre centre caps to the wheels to match the matte carbon fibre lip spoiler.

 

[Tes3P]

Right now… car is in the air…painting calipers… rivets on wheels will have same color…View attachment 802615View attachment 802616View attachment 802617

Did you use high temp caliper paint?

 

[Rothgarr]

The vinyl in the front is as good as it will get with me cutting it by hand. If I decide to try again I might try knifeless tape. I also removed the front license plate and attached the foglight trim for real. I think I'm done for now. Well, technically, I do still need to install my LowGlow kit...

 

[E.Potter]

Did you use high temp caliper paint?

yesss sirrrr

 

[weaksquad]

 

[Choncho]

@Choncho LR with uber wheels? If so nice!

Yes LR and have 19inch Art Replica Uber wheels.

Is it a wrap or PPF satin finish? How’s the cleaning part?

It's Xpel Stealth PPF, it's very easy to clean and maintain.

 

[E.Potter]

View attachment 803367

I know you're not gunna post this bad ass without wheel specs and offsets...c'mon...

 

[BadassBob]

I know you're not gunna post this bad ass without wheel specs and offsets...c'mon...

Here: Volk Racing TE37 Gallery for Model 3

 

[weaksquad]

Here: Volk Racing TE37 Gallery for Model 3

Thanks Bob

 

[E.Potter]

ooohhhh noooo...are you telling me I need to install front upper control arms to run a 9.5 +22 setup?? I wonder if it's possible to get a little more negative camber adjustment from stock setup with coilovers....or maybe stretch the tires a tad more?

 

[SMTEZZY]

New shoes TE37 Ultra M-Spec 19x9.5 +28

 

[canasion35]

New shoes TE37 Ultra M-Spec 19x9.5 +28View attachment 803467

Moar

 

[BadassBob]

Moar

MOARRRRRRRRRRRRRRRRRRRRRRRRRRRRR Damn Son thats hot

 

[weaksquad]

ooohhhh noooo...are you telling me I need to install front upper control arms to run a 9.5 +22 setup?? I wonder if it's possible to get a little more negative camber adjustment from stock setup with coilovers....or maybe stretch the tires a tad more?

I didn’t add any arms, you’re over thinking it

 

[BadassBob]

I didn’t add any arms, you’re over thinking it

So your on stock camber then?