Pic Under The Hood w/ Frunk Removed

[Marcust99]

Hey Guys,

So Tesla Mobile Service was just here installing the HomeLink module for my new MYP. The tech had to take the top plastic cover (snapped out)
and the Frunk (4 bolts) in order to install the module inside the front bumper. I thought I'd take the opportunity to snap a pic of what's
under there as I'm sure not many people have seen what it looks like....

 

[ArdeliaMapp]

Looks essentially the same as what was under the hood of my Volkswagen e-Golf

 

[Pianewman]

Great pic! This should be a stickie!

It may be the camera lens doing something weird, but it looks like the battery clamp is crushing the top of the 12V battery. Is that possible? I hope not, but it might be worth checking into.

 

[Hamrhead]

So I'm guessing that thing in front of the 12V battery is the Compressor that will be replaced under warranty on my car?

I've got the intermittent A/C & Heat problem (Sometimes it works/Sometimes not). My appt. is next month.


Thanks for the pic!

 

[angus[Y]oung]

Interesting sticker at the very front, says you have no radar! I didn't realize they tagged them that way.

 

[geekfam]

Thanks for the pic, looks very clean and tidy. Ironically Sandy Munro just posted under the frunk of the MME...much different look for sure.

 

[Mike_TV]

Strapping support from the heat pump assembly is gone. No Home Depot trim.

 

[TomServo]

I see they no longer use the Home Depot repair for the LLC.

 

[EVer Hopeful]

I thought I'd take the opportunity to snap a pic of what's under there as I'm sure not many people have seen what it looks like....

Not complaining, but I would have liked to see the picture after he installed the Homelink unit. It'd just be interesting to see where it goes (assuming it's a standard placement)

 

[GOVA]

FYI, builds with BioWeapon filter look different due to the filter compartment being ~5 times larger.

 

[Pianewman]

FYI: Homelink module rests down low, behind the driver's side headlight. Tech removed both frunk pieces, to access the battery disconnect and place the Homelink module.

 

[Level 1]

It may be the camera lens doing something weird, but it looks like the battery clamp is crushing the top of the 12V battery. Is that possible? I hope not, but it might be worth checking into.

Sure looks like it to me. Top looks deformed...

 

[RoBoRaT]

FYI, builds with BioWeapon filter look different due to the filter compartment being ~5 times larger.

Yup, they fit this huge filter in.