[PICS] - HRE P41 Wheels - 20x9 ET28 and 20x10.5 ET28 - Fits, but aggressively!

[FlatSix911]

I am running ET14 on the front with no rub except at full steering lock.
Check this Wheel/Tire calculator for proper fitment guidance:
Will They Fit - Online Wheel and Tyre Fitment Calculator

 

[arijaycomet]

Another good calculator can be found here:
Wheel Offset Calculator

What rotaz asked (20x10 ET30) would stick out 3mm or about 1/8 inch more than your setup, which already has a bit of poke. The other issue is that there will be less inner clearance. Based on my math, 20x10 up front at ET30 will provide similar 3mm front clearance reduction. Even the most "inward" wheel from Tire Rack would be 3-4mm more clearance than a 20x10.

So a 20x10 up front would perhaps fit, but clearance would be aggressive (poke) from the fender, and there is a slight chance of suspension rub up front. That extra inch of width is the main issue. However, I bet someone out there has run a 9.5 or 10 inch wheel up front-- hopefully they can comment if they have, and how it fit.

 

[ifung90]

20x10 totally fits.

I ran a 20x10 et15 front with 245/35/20 and it cleared no problem (although my tire size is off, i should've went with a 245/40/20 i know)

My new set up which is due to arrive in 5 days are:

VR wheels 3 piece forged.
22x10 et30
22x11 et30

Pirelli Pzero
255/30/22
275/25/22

This set up is according to online calculators, 6% less aggressive than 20x10 et15with the slightly stretched 245/35/20 Michelin PSS in the front.

 

[FlatSix911]

Looking forward to photos when the new shoes arrive.

 

[VegarHenriksen]

I'm very glad I found this post, because I am having such a hard time deciding on what to do for my summer setup. Thanks a billion for all the photos - it really helps!

Last winter I scored a set of Vossen HF3's which has always been my dream rims. They came off a BMW X4 so the fronts are 20x9+35 and the rears are 20x10,5+42. In order to make the rears clear I had to run 6mm spacers making them +36, but I always felt that I wanted the car even more aggressive than this.

The smallest spacers you can run with new studs attached is 15mm and that would make the rears +27! I want to add that I am also planning on running a slightly stretched setup with 255/30 on the rears. I am really eager to try and worst case I have leftover 15mm spacers