Potential Red Flag warning in NorCal this weekend.
- Thread starter jboy210
- Start date
I'm in the foothills east of Sacramento. Perhaps no Storm Watch for me because I'm only on a PSPS alert vs warning.
Storm Watch activated at 4AM here in the East Bay. Currently, the wind is dead calm. Powerwalls are full.
From PG&E’s PSPS website area:
PSPS Event 12/07/20:
5 counties impacted
Counties impacted: Fresno, Madera, Mariposa, Tulare, Tuolumne
NOTE: Typically, only part of a county is affected by a PSPS, not the entire county.
Affected tribal communities and tribal lands
Tuolumne Rancheria
Select a county to view shutoff details
Alameda is affected by (0) PSPS Events.
Contra Costa is affected by (0) PSPS Events.
PSPS Event 12/07/20:
5 counties impacted
Counties impacted: Fresno, Madera, Mariposa, Tulare, Tuolumne
NOTE: Typically, only part of a county is affected by a PSPS, not the entire county.
Affected tribal communities and tribal lands
Tuolumne Rancheria
Select a county to view shutoff details
Alameda is affected by (0) PSPS Events.
Contra Costa is affected by (0) PSPS Events.
I didn't get a SW warning, but the app shows charging form the grid to the powerwalls.
PG&E weather awareness only shows zone 8 in PSPS warning stage for 12/7/20. The rest of the week is currently clear for everyone.
But I got SW when I had Weather Service Red Flag warnings before and no PSPS
PSPS is specific to PG&E. Storm Watch for the rest of the country is for Storms and Weather Service warnings.
Ok so storm watch all day. Now I have been peak usage from grid for hours. How do I turn this stuff off??? I even tried self powered.
Ok self powered did the trick. Took some time to apply
Ok self powered did the trick. Took some time to apply
Also, PGE can and has cut power without a PSPS notice being sent. And Powerwalls need time to charge (up to 4 hours). NWS Red Flag Warnings is what Tesla seems to be using to trigger StormWatch.
bmah
Moderator, Model S/X, California Forums
StormWatch seems to be triggered by several different conditions, and it's never been clear to me if applying those conditions is automated or whether human intervention/judgement is involved.
Some other people have commented that they're not getting the benefit of their cost savings settings due to StormWatch filling up the batteries before solar production starts. Please do note that you're free to override StormWatch and re-enable it at a time of your choosing. I myself have done this on various occasions. Also remember that StormWatch events are fairly infrequent, so a day or two with less-than-optimal cost savings might be a reasonable trade-off for having full batteries in case of an outage (particularly during times of low solar production).
Bruce.
That is exactly my take. I even put in backup only if PSPS or NWS warnings are close. Who cares about $5 or $10 compared to what you could lose in an outage
My Powerwalls are in Storm Watch and fully charged from the grid. Previously they were dropping to 20% every night as I don't have enough panels to keep things really charged during these winter months. System charged to 99% from the grid, I didn't have to do anything. Gotta say I love the feeling of being backed up.
although it looks like the danger of a power failure here in the east bay is now remote (or was always remote) i am hesitant to turn off storm watch mode.
is turning it off a one-way trip, or if i were to re-enable it would the PW charge from the grid again (providing tesla still has SW turned on when i re-enable it?)
is turning it off a one-way trip, or if i were to re-enable it would the PW charge from the grid again (providing tesla still has SW turned on when i re-enable it?)
I turn it on only when I want it to charge, then turn it off again. I did that yesterday and today to soak up some extra electrons into the PWs. This time of year, I have my Reserve at 75%, so there's not that much more that can actually go in.
Similar threads
