Tesla Motors Club
During my installation, everything was tested and working. My PW2 units during install testing showed 20% SOC. They turned everything off and left. My city inspection came the next day and everything cleared. They did not turn any of the system on, just visually looked at everything. So now I am waiting for PTO.
I decided to test the system. All good, but the PWs wont show in the Tesla app. The one thing I do remember is during the testing, there was an additional round meter plugged in above the hard pull disconnect on the outside wall. This meter looked similar to the normal round meter that NVEnergy has to read my usage. The install crew removed that meter and put a blank cover on. I am assuming that the meter they removed is needed to turn on the PWs, correct?
I decided to test the system. All good, but the PWs wont show in the Tesla app. The one thing I do remember is during the testing, there was an additional round meter plugged in above the hard pull disconnect on the outside wall. This meter looked similar to the normal round meter that NVEnergy has to read my usage. The install crew removed that meter and put a blank cover on. I am assuming that the meter they removed is needed to turn on the PWs, correct?