Not on the list for the suspension issue but I do have an entry for checking the co-ax cable to the reversing camera...
The Model 3 trunk harness is equipped with a solid core coaxial cable that provides the rearview camera feed for visibility on the center display. Over time, repeated opening and closing of the trunk lid may cause excessive wear to the coaxial cable. If the wear causes the core of the coaxial cable to separate, the rearview camera feed is not visible on the center display.
Unavailability of the rearview camera display may affect the driver’s rear view and increase the risk of a collision. If there is a loss of rearview camera display, the driver can continue to operate the vehicle by performing a shoulder check and using their mirrors when backing.
Tesla Service will inspect the trunk harness on affected vehicles for wear. If wear is determined to be within specifications for the coaxial cable, Tesla Service will equip the harness with a guide protector to ensure a sufficient radius when the harness holds in a closed trunk state and prevent further wear. If wear is determined to be beyond the specifications for the coaxial cable, Tesla Service will install a new harness and guide protector.