Racing Brake 2 piece rotor set for Model 3 Performance

[destructure00]

Used, good condition front and rear rotor set for M3P. Racking Brake brand, OE size replacements. Front and rears are slotted, fronts are also vented. These retail for ~$2100 new. Asking $1200 OBO plus shipping, or local pickup in Phoenix.

 

[Dan Wang]

You might want to list thickness left and minimum thickness. Are these the same rotors where you used the Racing Brake XT970 pads down to 50%?

 

[destructure00]

You might want to list thickness left and minimum thickness. Are these the same rotors where you used the Racing Brake XT970 pads down to 50%?

The XT970s are down to 50% because they glazed over and I sanded the glazing off, twice. That is not reflective of rotor wear. These rotors have only seen 4 track days. I'll try to find minimum thickness info.

 

[destructure00]

Found the mins stamped on the rotor edges.

Fronts are currently at 26mm, min is 24mm
Rears are currently at 21mm, min is 19mm

 

[Dan Wang]

Thanks. New thickness should be 25mm / 20mm respectively.

 

[destructure00]

Thanks. New thickness should be 25mm / 20mm respectively.

Could be pad transfer material that adds the additional 1mm front and rear I guess?

 

[Dan Wang]

Not likely. RB most likely decided to go thicker than OE.

 

[destructure00]

Not likely. RB most likely decided to go thicker than OE.

Oh I see, you were talking about the OE rotors at 25/20. Yes, the RB rotors are thicker than stock. I don't remember how much, off hand.

 

[destructure00]

Want to get these sold....let's try $950 as a new asking price.

 

[destructure00]

Anyone? Open to reasonable offers. I can have the rotors resurfaced prior to shipping as well if that helps.

 

[destructure00]

Bump...$800 shipped...OBO

 

[sarang96]

would it fit non performance calipers?
Thank you

 

[destructure00]

would it fit non performance calipers?
Thank you

No, it will only fit performance calipers.