Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Rain guard for rear view camera (Model S and Model X)

This site may earn commission on affiliate links.
Here's a drip guard I made for the X based on one I created for the Model 3 from this thread: Another Tesla design FIX, Rear view camera and rain It's a really simple design that lets water drip instead of rolling back towards the camera. Got some rain today in LA and it seems to be working well for the X.

I tested this on a 2019 Model X, but this should work for both model S/X. I don't know if it will work on 2022+r, but maybe someone can test it and let me know. If you have a 3d printer, you can print the attached STL. Use double sided tape to secure it. Don't have any good pics of it, but it's low profile, no one will notice it. It barely shows up in the camera view.

Let me know if you end up trying it!

1680156373111.png
 

Attachments

  • model_x_rain_guard.stl.zip
    4.9 KB · Views: 90
Last edited:
Yea not paying $30 for that.

If you have a friend with a printer, print mine in 5 minutes for 0.01. Heck, have them print a dozen so that you can replace them whenever you go to the car wash and it falls off.