Step 5: Install the Wheel Spacer in Place
Place the BONOSS BLM Series Wheel Spacer on the hub and align the holes in the spacer with the wheel studs, and ensure that the wheel spacer is firmly seated and flush against the hub. Use the matching lug nuts to tighten the wheel spacer to original studs. Carefully turn the lug nuts by hand to ensure they are easy to thread in to avoid cross-thread. Tighten by hand, but do not torque the lug nuts completely. Just put them in place and fasten them a bit.
Step 6: Torque the Matching Lug Nuts to Spec
Use a torque wrench with the ***manufacturer-recommended torque specification*** to snug up the lug nuts in a star pattern. Do not overtighten the nuts. In addition, ensure the original studs do not protrude past the wheel spacer surface. If you meet problems that the hubs roll while tightening the nuts, you can ask an assistant to press the brake pedal to prevent the hub from rolling.