-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Show off your aftermarket Model X wheels...
- Thread starter wildTING
- Start date
dkim12
Member
CrewKize
Member
Been running these since December 2019 on my 2020 x. They are 20x9.5 et 25 and 20x9 et 30.
DIL
Member
I’m getting my MX in March to replace an MS with 21” arachnids - which I LOVE. Considering Unplugged Performance or Vossen forged. Wish there were more OEM wheel choices for the X.
hi
I’m about to buy new wheels and want something really aggressive but not anything that is giving me issues like rubbing when in different height mode. I will also stick to 20” for ride comfort. I can choose any offset between 9-50 from the manufacturer.
what do you think about
20x9.5 +28 with 265/45-20
20x11 +28 with 285/45-20
I want something like this in the rear
any ideas
thanks
Hi
I have also ordered a MX and will get a delivery in Maj 2021. Any idea if the wheels will be the same? There is a discussion about a wide body model S that has been spotted a couple of days ago. Could Tesla have done a wide body extension on the MX too?
I'm considering the following wheels: 2Forge ZF2 - 2Forge (2forgewheels.com)
20x9.5" ET28(24lb) with: 265/45-20 Pirelli P Zero 68db
20x11" ET28(26lb) with: 285/45-20 Pirelli P Zero 69db
DIL
Member
Those wheels look great. No idea if/when there’s a refresh. Can only keep our fingers crossed for now.
SnakeDoctorTD
Member
I'm looking at the Ferrada CM2 setup.
2019 Tesla Model X - CM2 MGC - Ferrada Wheels
They don't show the offsets on the page, but with a little digging it looks like it's going to be
22x9.5 +20
22x10.5 +40
Seems like pretty safe fitment yeah? Would I be able to lower the car further with links without issues? Their project car seems lowered to me.
2019 Tesla Model X - CM2 MGC - Ferrada Wheels
They don't show the offsets on the page, but with a little digging it looks like it's going to be
22x9.5 +20
22x10.5 +40
Seems like pretty safe fitment yeah? Would I be able to lower the car further with links without issues? Their project car seems lowered to me.
EVS Motors
Former Vendor
This was a fun X project. Hermès inspired color scheme! Vossen HF2 wheels in 22's satin black. The HF2 wheels are probably my favorite for the X. The detailed wheel design really balances out the simplistic/clean body lines on the car.
See what you think!
~4:01 mark start of X project
See what you think!
~4:01 mark start of X project
SnakeDoctorTD
Member
DIL
Member
Love the refresh 22’s. But still can’t bring myself to order them since this will be the family hauler with occasional trips to the snow.
SnakeDoctorTD
Member
So I decided to the Ferrada FR1s with matte black face and gloss black lip.
22x10.5 et 40 285/35
22x11 et 20 305/30
5mm spacers in front to clear the strut. Rear spindles needed to be trimmed down to accommodate the center caps.
Pictures are in very low setting with lowering links. I have not heard any rubbing yet. I parallel parked the other day, and didn't notice any issues. I'm not sure I went full lock though honestly.
Not sure why the front looks a little higher in this picture, perhaps the suspension was in mid-adjustment still.
22x10.5 et 40 285/35
22x11 et 20 305/30
5mm spacers in front to clear the strut. Rear spindles needed to be trimmed down to accommodate the center caps.
Pictures are in very low setting with lowering links. I have not heard any rubbing yet. I parallel parked the other day, and didn't notice any issues. I'm not sure I went full lock though honestly.
Not sure why the front looks a little higher in this picture, perhaps the suspension was in mid-adjustment still.
SnakeDoctorTD
Member
SnakeDoctorTD
Member
Similar threads
