Show off your aftermarket wheels.

[colindo1990]

here u go

Amazon.com

 

[Hotboy408]

What do you need to make Bmw work on the S? Any assistance is appreciated

15mm front 7mm rear spacers

 

[Hotboy408]

what are the specs of the wheels and tire size?

did you use any spacers?

Look fire btw,

TIA

Oem size front..265/30 and 295/30 rear 20"

 

[colindo1990]

Oem size front..265/30 and 295/30 rear 20"

do you use extended bolts with the spacers to get enough turns ?

 

[Waximus]

22” Lexani R-Twelve Machined/Black w/ Chrome Lips.

 

[jaga]

Hello, I'm looking for wheel gurus that can help me with custom offset for my 2018 Model S, wheel builder will build to my specs I give them.
Looking for super flush to fenders in sizes (fronts) 21x9 and (rears) 21x10.5 TIA

 

[jaga]

Has anyone put a squared 21x10.5 on there model s? Looking at some wheels that I can get a staggered set at 21x9 and 21x10.5 but I like the concave look and they don't have a 20x10. Please any help would be appreciated. Thanks.

Yeah I always wanted that like the Bimmer,Audi guys run.

 

[colindo1990]

et30 fronts and rears for the specs u posted

 

[jaga]

et30 fronts and rears for the specs u posted

ok 30 for the fronts however Mrj25 has 38 for the rears on his Vossens. Is the rear offset 38 too aggressive vs. 30 ? Thanks you

 

[tph4m]

ok 30 for the fronts however Mrj25 has 38 for the rears on his Vossens. Is the rear offset 38 too aggressive vs. 30 ? Thanks you

38 is weak, go with 30

 

[jaga]

38 is weak, go with 30

Do you think 30 will rub with 285 or 295 rubber? Keep in mind my car is pre refreshed Gen 2 model S.
How about 35? Sorry guys I'm horrible at this.

 

[MikloVL]

Do not get 38 rear if you plan on lowering your car. I had 38 w 285/30 and I rubbed. Rn I’m running 3mm spacer so I’d suggest get 35 or less.

 

[colindo1990]

et30 in the rears with 285's will not rub even lowered

 

[jaga]

et30 in the rears with 285's will not rub even lowered

I saw your picture and to me it looks like your wheels has a poke?
I think i will try 35, I can always get 5mm spacers to get 30 from the 35 I ordered correct?

 

[colindo1990]

I saw your picture and to me it looks like your wheels has a poke?
I think i will try 35, I can always get 5mm spacers to get 30 from the 35 I ordered correct?

those pics were 21x11 et 28 not 21x10.5 et 30

 

[jaga]

those pics were 21x11 et 28 not 21x10.5 et 30

Thanks for clarifying

 

[Freshness]

after getting rear trailing arms, I miss having no camber in the rear.

I kind of want to go lower now maybe -7/-8

 

[hybrid_eg]

Just mounted these up, still need links and will likely go with camber arms. Here is a quick preview.. I'll post some better pics once the links/arms/alignment is done.

Here are the full specs:

Wheels: Vossen HF-7
Optional Red & Black center caps
Front: 21x9.5 +21
Rear: 21x10.5 +26
Finish: Satin Black
Stock tire size: Michelin Pilot Sport 4S T2 - 265/35ZR21 101Y Front, 295/30ZR21 102Y XL Rear
Vossen Forged Aluminum Wheel Lug Nuts

45lbs+ rotational weight saving over 21" Arachnid wheels that came with the car.

 

[Hotboy408]

do you use extended bolts with the spacers to get enough turns ?

I have ford van extended stud.. same as model 3 .. check the thread.

 

[CREPlaid]

Hoping to get some photos, but this was a little video done of the vehicle:
21x9.5 21x10.5 Incurve Wheels IF-SV5 Floating Concave

https://flic.kr/p/2nLFQDY