Here we will be posting our most recent work on the Model S. In the following posts you will see the steps of the installation process from start to finish. We like our customers knowing exactly what goes on and how we install our paint protection kits. Please feel free to message us and ask any questions you may have on the product or our work! These are things you will NOT find in our work: - Stretch Marks - Lift Lines - Dirt under the film - Film Blemishes - Kits aligned incorrectly 2016 Tesla Model S When we received the car it had bird droppings, hard water spots and scratches all over it. So we did a thorough exterior wash and paint correction before installing paint protection film. We received the car just like this with bird droppings all over it. So we washed it and used a clay bar to remove all the micro debris. Here you can see an area on the hood with some pretty bad scratches and where the bird droppings have begun to eat at the paint. This is the same area after paint correction! Prepped and ready for paint protection film. Installing Suntek film on the hood. Ryan installing film on the mirrors. The Model S is getting full 3M crystalline window film. And here is the finished install!