I've had my Gen 2 Wall connector hooked up since 2018 and haven't had any issues until recently (past 3-4 mos). I keep getting this error "Charge rate reduced-Wall connection hot. Outlet or Wall connector wiring must be checked" It's happening a lot more frequently as of late and its starting to worry me.
I had it installed by a certified electrician. All I know is that its hooked up to a dedicated 100 amp circuit. I took some pics and was wondering if anyone here can identify if there's anything wrong. The only thing I can notice is that the red AWG Wire is turning black. I don't know what that means but it can't be good.
I was going to order a gen 3 wall connector and replace it myself but i'm afraid it will do the same thing. Any help would be appreciated. Thanks in advance.
Pics:
You can see the red wire turning black.
I had it installed by a certified electrician. All I know is that its hooked up to a dedicated 100 amp circuit. I took some pics and was wondering if anyone here can identify if there's anything wrong. The only thing I can notice is that the red AWG Wire is turning black. I don't know what that means but it can't be good.
I was going to order a gen 3 wall connector and replace it myself but i'm afraid it will do the same thing. Any help would be appreciated. Thanks in advance.
Pics:
You can see the red wire turning black.