Vendor Volk Racing / Gram Lights / ADVAN Racing Wheels - Authorized Dealer

[ProjectTrinity]

Time to join this! I recently got my MYP and wanna rid those super heavy 21” that attracts all the curbs. And to match the nsx on TEs!

Would the TEs and Gram Lights be ok as far as the load rating goes? Some people raised concerns over putting M3 wheels on MYs due to the load rating.

 

[MODEL+]

1 set 18x9.5 +22 Gram Lights 57DR Semi-Gloss Black in-hand ready to ship!
Message for pricing!

Danny

 

[afctito]

Hi quick question if you don’t mind. Would a Advan GT Beyond 19x10 +35 fit with no issues on a M3P lowered on coils? I want something a bit more aggressive than a 9” wheel but just want to make sure it’s feasible. Also wanted to confirm whether or not they’d fit because of the M12/14 issue

 

[dmd2005]

@afctito: I’m lowered on MPP Comfort Coilovers and I am currently running 19x9.5 +29 Beyond GT without issues, thanks to Danny for getting me a set of 20” Advan Racing R6’s going on later this week.

Super lighweight at 20.5 lbs for a 20x9.5 wheel. For comparison, my 19x9.5 Volk Racing TE37 M-Spec Ultras weighd in at 22.4lbs.

 

[afctito]

@afctito: I’m lowered on MPP Comfort Coilovers and I am currently running 19x9.5 +29 Beyond GT without issues, thanks to Danny for getting me a set of 20” Advan Racing R6’s going on later this week.

Super lighweight at 20.5 lbs for a 20x9.5 wheel. For comparison, my 19x9.5 Volk Racing TE37 M-Spec Ultras weighd in at 22.4lbs.

The R6s are sweet man!

You didn’t have to bore out the stud holes on the wheels to accommodate the M14 sizing?

 

[dmd2005]

Rex

The R6s are sweet man!

You didn’t have to bore out the stud holes on the wheels to accommodate the M14 sizing?

No boring holes for the lugs. Just needed hubcentric rings from 73.1mm to 64.1mm.

 

[afctito]

Rex

No boring holes for the lugs. Just needed hubcentric rings from 73.1mm to 64.1mm.

Awesome man, thanks.

Any pics of the Advans on your car?

 

[civicdrivr]

Do you have any 19s in stock/arriving soon?

 

[afctito]

1 set 18x9.5 +22 Gram Lights 57DR Semi-Gloss Black in-hand ready to ship!
Message for pricing!

View attachment 794316
View attachment 794320



Danny

Hi Danny, would you be able to message me? Can’t message yet on here. Not about these wheels but had a question on TE37’s if you don’t mind. Thanks!

 

[MODEL+]

Hi quick question if you don’t mind. Would a Advan GT Beyond 19x10 +35 fit with no issues on a M3P lowered on coils? I want something a bit more aggressive than a 9” wheel but just want to make sure it’s feasible. Also wanted to confirm whether or not they’d fit because of the M12/14 issue

Hello,

Unfortunately, 19x10 +35 will not clear the front struts. We suggest 19x10 +25 spec will work.
The more ideal spec would be 19x9.5 +29 as @dmd2005 mentioned . Advan GT Beyond are already M14 drilled.

Here is one of our client on 19x9.5 +29 Advan GT Beyond in Racing Titanium Black.

@afctito: I’m lowered on MPP Comfort Coilovers and I am currently running 19x9.5 +29 Beyond GT without issues, thanks to Danny for getting me a set of 20” Advan Racing R6’s going on later this week.

Super lighweight at 20.5 lbs for a 20x9.5 wheel. For comparison, my 19x9.5 Volk Racing TE37 M-Spec Ultras weighd in at 22.4lbs.

The pleasure is always mine sir

Do you have any 19s in stock/arriving soon?

"Soon..."

Hi Danny, would you be able to message me? Can’t message yet on here. Not about these wheels but had a question on TE37’s if you don’t mind. Thanks!

Messaging now!



Regards,
Danny

 

[raptor450]

Hi Danny, would you be able to message me as well? New account and I wanna get my hands on some Volks

Have a few questions about fitment on a MYP with regards to the G025s and would like your expertise if you've the time. Thank you.

 

[dmd2005]

Thanks Danny for setting me up with my new set of R6’s. Took me over 10 sets of wheels to finally say I found the perfect match (tied with my 21” set of Signature SV305S). Better than the Advan Beyond GT’s and TE37’s. Only need to finish the look off with the center caps

 

[MODEL+]

Thanks Danny for setting me up with my new set of R6’s. Took me over 10 sets of wheels to finally say I found the perfect match (tied with my 21” set of Signature SV305S). Better than the Advan Beyond GT’s and TE37’s. Only need to finish the look off with the center caps

These are so clean and classic!!
Thanks again for trusting in me on sourcing these for you


Danny

 

[MODEL+]

Hi Danny, would you be able to message me as well? New account and I wanna get my hands on some Volks

Have a few questions about fitment on a MYP with regards to the G025s and would like your expertise if you've the time. Thank you.

Messaged!

---

We put together a "plug & play" 18x9.5 Gram Lights 57DR package. Only 1 set available to ship IMMEDIATELY!

Gram Lights 18x9.5 +22 Semi Gloss Black Wheel Set

RAYS Gram Lights 57DR - In-stock ready to ship! Finish: Semi Gloss Black Spec: 18x9.5 +22 Lug Pattern: 5x114.3 Made in Japan ---- Model 3 Performance Plug & Play Package: 4x Gram Lights 18x9.5 +22 Wheel RAYS 19 HEX Steel Lug Nuts Muteki Hub Centric Rings Factory Bluetooth TPMS Sensors Ideal...

modelplusstudio.com

We offer tires suggestions as well.


Danny

 

[RogueP3D]

Looking to get rid of the uberturbines on my M3P finally and looking for 57DRs or some TE37s. Not really sure on what size would be best, but looking to drop down to a 19in wheel and want a flush look. Could you PM me as I don’t have access to do so yet due to new account.

Thanks!

 

[MODEL+]

The moment a lot of you have been waiting for! 19" Model 3 Performance plug and play TE37 Ultra M-Spec.

Very few sets started to roll in from our order! These will go quick!

MODEL+

Zero Emissions Studio

modelplusstudio.com

Danny

 

[Masi]

The moment a lot of you have been waiting for! 19" Model 3 Performance plug and play TE37 Ultra M-Spec.

Very few sets started to roll in from our order! These will go quick!

MODEL+

Zero Emissions Studio

modelplusstudio.com

Danny face 4 concave ? What color available

 

[chen01]

19x9.5 +34 TE37 Ultra M-Spec
19x9.5 +28 TE37 Ultra M-Spec
19x10.5 +31 TE37 Ultra M-Spec



Danny

Hi Danny and other members,

I am new to wheels and would like some TE37s on my 2021 Model 3 AWD LR. I am think of putting on the following sizes.

Front 19x9.5 +34 TE37 Ultra M-Spec
Rear 19x10.5 +31 TE37 Ultra M-Spec

Will these fit? What size tyres would you recommend, do not want issues with rubbing or be slammed.

I have MPP comfort coils, rear camber, toe and front lower control arm bearings installed last week to their recommended initial height.

I hope this makes sense and thank you in advance.

 

[MODEL+]

Danny face 4 concave ? What color available

Correct! It's Face 4 concavity.

Hi Danny and other members,

I am new to wheels and would like some TE37s on my 2021 Model 3 AWD LR. I am think of putting on the following sizes.

Front 19x9.5 +34 TE37 Ultra M-Spec
Rear 19x10.5 +31 TE37 Ultra M-Spec

Will these fit? What size tyres would you recommend, do not want issues with rubbing or be slammed.

I have MPP comfort coils, rear camber, toe and front lower control arm bearings installed last week to their recommended initial height.

I hope this makes sense and thank you in advance.

They will fit, but may I ask why you want to run that staggered size?


Thanks,
Danny

 

[tranquilo]

Interested in Advan GT Beyond 20x10 Model Y fitment. Please PM

Thank you!