Window won't go up after decalibration

[dedicatedtek]

hey guys @KalJoMoS @PJ_Bogo @Chris TX . I'm also having the same issue with the passenger door control unit or wiring- but I messed up !

I removed the passenger side door panel, and closed the door. Now I can't open the door !

see: my thread here

Can you point out which wire(s) I could jump from the passenger foot-well over to the door control unit (since I can't get to the hinge) ?

thanks.

 

[Chris TX]

hey guys @KalJoMoS @PJ_Bogo @Chris TX . I'm also having the same issue with the passenger door control unit or wiring- but I messed up !

I removed the passenger side door panel, and closed the door. Now I can't open the door !

see: my thread here

Can you point out which wire(s) I could jump from the passenger foot-well over to the door control unit (since I can't get to the hinge) ?

thanks.

You should be able to open the door with a pair of needle-nose pliers and the door handle cable.

 

[dedicatedtek]

You should be able to open the door with a pair of needle-nose pliers and the door handle cable.

thanks, I was able to open door - just had to pull cable harder.

 

[sergo0329]

And now I've confirmed it's a wire break. This is in the wire loom between the door and the body. I'm going to check all the other wires.

Edit: All the other wires appear to be fine. This black wire went to the window regulator/motor. View attachment 987993

Thank you very much, I had the same issue, and I fixed it well, and now everything is working, thank you a lot!