Search results

Has anyone tried towing a small car (miata, s2000) with their Model S? I see the 4000lb hitches but UP also has a 5000lb rated hitch. I think with a 16ft trailer, it comes in around 4500lbs.. Is that pushing it for these cars?

It’s common after thousands of miles, not 2 weeks after getting a fresh one. My car has 15k on it.. this isn’t common. Don’t normalize something that is an engineering flaw.

I’ve having the same smells in my 2022 MS. The service center has replaced the cabin filter twice.. and blames it in the hot Texas weather. I’m getting tired of taking it it the sc but it’s ridiculous to have this smell coming out of a 1yr old car

So this statement in the ebay listing from the seller is not a real problem with these spacers, or did you have to do some mods? I’m so sorry guys, didn’t mean to leave y’all hanging. I originally bought 20mm spacers from the same seller for my Arachnids (link below). Then I swapped to a...

Nice day to get her cleaned up. BCForged 21x10.5 +34 Square, rotate-able 285/30/21 with 15mm spacers in the rear.

i used these and they were perfect https://www.ebay.com/itm/143927245680

I ended up biting the bullet and jumping into a 2022 😂

No rubbing at all after I took the spacers off. The offset is a little weak but the 305 width makes up for it. I previously had 285 +34 on my old wheels and it didn’t rub

F 21x10.5 +34 285/30/21 R 21x10.5 +34 305/30/21 Square setup with same offsets. The plan was to run the rears with a +15mm spacer and 285, so I could rotate but ended up finding some 305s instead (which defeats the purpose of square). I took the spacers off and these is how she sits now...

38 is weak, go with 30

Wrap? It’s stock red isn’t it?

damn man.. wish u were local!

Long gone, sorry!

Is there a reason why people are against running a squared setup with a 15mm in the rear? I’m thinking 21x10.5 +35 all around with +15mm spacer in the rear. You can get flush fitment and able to rotate. Are spacers that big of a deal breaker?

Why matte over brushed?

does the height of the tire matter? I am thinking of running 285/30/21 (85.5mm) in the front and 305/30/21 (91.5mm) in the back. Rear tire will be a little taller---will that mess up anything?

I have 21x10.5 + 34mm on the back of my 2020 and it cleared no problem. 4mm isnt a ton, perhaps use a 5mm spacer to push it out more. Plus itll look more flush!

Are you a refresh model? Regardless, factory Arachnids are 21x10.5 +45mm** in the rear on 295s and there is plenty of clearance. Surprisingly to see that your +38 don’t fit

do you have pics and offsets of the front wheels? I'm wondering if my current rear wheels (21x10.5 +34mm) will fit up front. If so, i might get another identical pair and run square setup with spacers in the rear.

Maybe it’s the region/market. I’m in Houston and there wasn’t many MSPs last month

I recommend getting a quote from Autonation. I had a 2020 MSP, red, 24k miles without FSD and they gave me 88k. You should be able to fetch 94k easily!

Bumpppo

I accidentally hit that Pay button thinking it would also prompt me. Instead, it drafted my remaining 50k balance a week ahead of delivery! I about had a heart attack because The deposit on my previous car hadn’t cleared yet

it would. I think the new arachnids would fit on a pre-refresh with a little poke but not much

A brand new Plaid with your config is $143400 from Tesla. Why in the world would someone pay $165k.. cover your taxes, then also pay their own taxes when they go to register it? Itll be around $154k including taxes buying direct from Tesla, with less than a week wait lol

Put my pre refresh Brixton RF10s wheels onto the Plaid using 20mm spacers.. prob a little too much poke but much better than arachnids :)

Sorry to bump a super old thread but has anyone confirmed if the knuckles are different between Brembo rear calipers and non brembo rears?

Kinda embarrassing for this type of car. They had dual piston brembos before 2018.

Has anyone tried retrofitting CTSV rear calipers on the 2021+ models? I can’t stand the fake rear caliper on these newer models, especially with a color change. Makes it more obvious that it’s a cover.

price lowered to $4400 picked up

They will but will need a 10mm spacer to make them look flush. Refresh S has a slightly wider body

They won’t, these are 5x120 bolt pattern. MY and M3 are 5x114.3

I forget the company but got the lowering links off of Ebay. No rubbing at all

Hey all, I had these on my 2020 Model S Performance but recently upgraded to a Plaid and no longer need them. Tires were replaced in front and rear less than 1500 miles ago at Discount Tire. 21x9 +25mm 245/35/21 Michelin Super Sports 21x10.5 + 34mm 285/35/21 Michelin Pilot 4S Wheels are in...

Came off my 2022 Plaid. Barely driven, practically brand new. $2000 picked up

lookin like stilts but it might do for a short period of time

I’m in the same boat as you, I have a set of Brixtons off my 2020 Performance that Id like to use on my incoming Plaid. Same offsets and tire sizes as you! I think it’s a +20mm spacer all the way around but running a 245 up front might be too narrow

did you have any issues with the stud size running 20mm spacers on stock wheels?

Ordered a Plaid on 6/5, Red, white interior and base wheels. Received VIN on 6/7 and delivery date 6/16. Pretty crazy fast

Priced lower to $89000 with factory wheels.

sorry, its a 2020. I'm unable to edit the original post :/

Here are a few more recent pics :)

2022 Model S Performance with 24xxx miles, no FSD $92,500 with Brixtons $90,000 with stock wheels - Red Multi Color - White interior - 19" Slipstream wheels with 90% tread (not pictured) - 21x9 21x10.5 Brixton Forged RF10 with new Michelin SS in front and 4S in rear - Airmatic Lowering Links -...

I’m considering getting my 20’ Performance wrapped in another color and think it’s a good opportunity for a facelift. I really like the 2021 front bumpers and was wondering if it would be a direct fit with new fogs. I’ve seen both cars side by side and the dimensions look like it’ll fit but...

You can submit transfer of ownership at the link below. It took about 24hrs before I had all access: Tesla Account Support

+1 vote for Brixton. I think a few of us are rocking them in Houston though lol

beautiful car. where did you get the spoiler from? First time ive seen ducktail style

good morning! I purchased a 2017 P100D with 30k miles with a third party dealer a few months ago. Since then, I've had some headaches and growing pretty frustrated with the car. There have been some small issues like side repeater camera failing and older mcu freezing up. But the main issue is...

Good to know. There wasn’t much info out there so thanks for giving me some confidence haha. Your car looks sick!